field_job_occupational_field_parents_all

field_job_employment_type

job_organization_name

city

state

<h3>Job Description</h3>
Job Description
Senior Mechanical Engineer will lead MEP design efforts, mentor junior staff, and help drive the continued growth of our firm. This role requires hands-on HVAC and plumbing design in Revit, strong leadership skills, and a practical understanding of construction. The ideal candidate is collaborative, detail-oriented, and ready to take an active role in project delivery, internal training, and business development. Key Responsibilities:
<ul>
<li>Lead HVAC and plumbing system design for a range of building types</li>
<li>Manage and mentor a team of at least 3 junior engineers and designers</li>
<li>Coordinate with electrical, architectural, and structural teams</li>
<li>Perform HVAC load calculations, Title 24 compliance modeling, and system sizing</li>
<li>Design domestic water, waste, and vent systems</li>
<li>Produce and review coordinated Revit models and construction documents</li>
<li>Conduct site visits, field verification, and provide support during construction</li>
<li>Communicate clearly with clients, consultants, and internal teams</li>
<li>Apply a practical understanding of construction methods and sequencing to improve design outcomes and reduce field conflicts</li>
</ul>
 Required Qualifications:
<ul>
<li>10–15 years of hands-on, real-world mechanical &amp; plumbing design experience (not just certifications)</li>
<li>Expert-level Revit skills and a solid MEP design workflow</li>
<li>Excellent communication and team leadership abilities</li>
<li>Practical, field-based understanding of how systems are constructed and installed</li>
<li>Proven experience in:</li>
<li></li>
<li>Large multifamily projects (hundreds of units)</li>
<li>Tenant improvements and office renovations</li>
<li>Commercial kitchen design</li>
<li>Industrial or manufacturing projects</li>
<li>High-rise systems and vertical distribution</li>
<li>Knowledge of applicable codes (Title 24, ASHRAE, UPC, UMC, CBC)</li>
<li>HVAC load calculations and energy compliance modeling Nice to Haves: This is an on-site position with no option for remote work.</li>
<li>
<ul>
<li>Commercial Design experience (gyms, churches, theaters)</li>
<li>Community centers</li>
<li>Bachelor’s degree in Mechanical Engineering or equivalent experience</li>
<li>California PE license</li>
<li>Involvement in professional or industry organizations</li>
</ul>
</li>
</ul>

Senior Mechanical Design Engineer

<h3>Job Description</h3>
Job DescriptionMechanical Project Manager
Position Overview We are seeking a highly skilled Mechanical Project Manager to oversee and lead mechanical projects from conception to completion. The ideal candidate will be responsible for managing project schedules, budgets, and resources while ensuring that projects meet quality standards and client expectations. Key Responsibilities
<ul>
<li>Lead and manage mechanical projects in HVAC, commercial, and industrial sectors.</li>
<li>Coordinate with engineers, contractors, and stakeholders to ensure project alignment and success.</li>
<li>Develop and maintain project schedules, budgets, and resource allocation plans.</li>
<li>Conduct regular project meetings to track progress and address any issues.</li>
<li>Ensure compliance with all safety, quality, and regulatory standards throughout the project lifecycle.</li>
<li>Prepare project documentation, including reports, proposals, and contracts.</li>
<li>Oversee the installation and commissioning of mechanical systems, including sheet metal work.</li>
</ul>
Qualifications
<ul>
<li>Bachelor's degree in Mechanical Engineering or related field.</li>
<li>Minimum of 5 years of experience in project management within the mechanical or construction industry.</li>
<li>Strong knowledge of HVAC systems and mechanical installations.</li>
<li>Experience with sheet metal fabrication and installation.</li>
<li>Proven ability to manage multiple projects and deadlines effectively.</li>
<li>Excellent communication, leadership, and organizational skills.</li>
<li>Project Management Professional (PMP) certification is a plus.</li>
</ul>
Benefits
<ul>
<li>Competitive Salary: $160k - $200k + Bonus</li>
<li>Profit sharing/ESOP Participation</li>
<li>Health Insurance</li>
<li>Dental Insurance</li>
<li>Vision Insurance</li>
<li>Life Insurance</li>
<li>Paid Time Off</li>
<li>Paid Holidays</li>
<li>401(k)</li>
<li>Car Allowance + Fuel Card</li>
<li>Career growth potential</li>
<li>Outstanding company culture: work/life balance, friendly team environment, and employee recognition programs</li>
<li>Opportunity to participate in community outreach programs and other charitable endeavors</li>
</ul>
 - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 09/09/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. &nbsp;CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at <a href="mailto:Benefits@CyberCoders.com" target="_blank">Benefits@CyberCoders.com</a> to make arrangements.

Mechanical Project Manager

<h3>Job Description</h3>
Job Description
Umbra is an American space technology company delivering advanced systems, from sensors to spacecraft, that empower customers worldwide with unmatched access to critical information from space. Our mission is simple and ambitious: redefine space—for people, systems, and missions in every domain. Umbra’s ecosystem operates through three business units: Remote Sensing (the data), Space Systems (the components), and Mission Solutions (the platforms).Together, our teams develop capabilities that deliver persistent access, resilient performance, and mission-ready solutions, advancing U.S. space leadership while keeping the world safe and informed. 
About the Team
Space Systems – The Components
 Space Systems is where Umbra turns hardware and software designs into on-orbit realities; developing, implementing and iterating mission-ready core technology, while simultaneously advancing the next generation of our own satellite constellation. Space Systems is vertically integrated across the satellite architecture, thus the team designs, builds, and tests an array of critical components and subsystems, including power systems, communications, control systems, deployment hardware, avionics, and payloads, as well as the flight software, firmware and digital design solutions to support the entire hardware stack. Our focus is on first principles engineering, and our mandate is simple: it has to work when it counts. Every bolt, board, and binary is proven on our own SAR constellation, ensuring flight-proven reliability where failure is not an option. 
 If you want to work on cutting edge space technology while maintaining the highest standard for innovation and mission ready performance, you belong here at Umbra.
About the Job
We are looking for a highly skilled and motivated professional to become an integral part of our dynamic and multidisciplinary Space Systems engineering team as a Staff Mechanical Engineer. In this position, you will have the opportunity to contribute significantly to the design and development of innovative, next-generation space systems and mechanisms. The ideal candidate will possess a deep passion for designing, prototyping, building, and testing hardware, as well as demonstrable expertise in the area of composite structures specifically tailored for spacecraft applications.
This position is based on-site in our Santa Barbara, CA office.
Key Responsibilities
<ul>
<li>Design and analyze spacecraft hardware and components, including: </li>
<ul>
<li>Collaborate with cross-functional teams to derive and refine requirements.</li>
<li>Perform detailed design for structures and for deployable panels.</li>
<li>Perform analysis for launch loads and on-orbit load cases.</li>
<li>Build Finite Element Models to estimate on-orbit micro vibration propagation through the spacecraft.</li>
<li>Evaluate and down select fabrication vendors.</li>
</ul>
<li>Work closely with the Chief Engineer and Systems Architects to optimize designs for performance and manufacturability.</li>
<li>Create detailed design documentation, including drawings, design guides, and Interface Control Documents (ICDs).</li>
<li>Own the design through the full build and test lifecycle, including:</li>
<ul>
<li>Develop and execute work instructions, test plans, and test reports.</li>
<li>Support complex secondary operations, such as solar cell laydown and string welding.</li>
<li>Partner with technicians and manufacturing engineers to troubleshoot and resolve hardware issues.</li>
<li>Vendor management and ensuring quality of received components.</li>
<li>Develop and conduct Qualification campaigns.</li>
</ul>
<li>Provide mechanical engineering support to other engineering teams as needed.</li>
<li>Occasionally support launch and test campaigns outside regular hours, including evenings and weekends.</li>
<li>Perform other duties as required.</li>
</ul>
Requirements
Required Qualifications
<ul>
<li>Bachelor's degree in Mechanical, Aerospace Engineering, or a related field.</li>
<li>10-15+ years of professional experience in mechanical engineering, specializing in composite and structures design.</li>
<li>Strong multidisciplinary understanding of composite fabrication and inspection.</li>
<li>Experience with the structural analysis of honeycomb core structures.</li>
<li>Hands-on experience in manufacturing and assembling parts using various methods and standards.</li>
<li>Proficiency in CAD software, with experience in design and drafting to ASME Y14.5 standards.</li>
<li>Expertise in first principles analysis, including hand calculations and Finite Element Analysis (FEA).</li>
<li>Excellent problem-solving skills, with the ability to independently research, diagnose, and clearly explain technical challenges and solutions.</li>
<li>A strong desire to thrive in a fast-paced, highly collaborative team environment.</li>
</ul>
Desired Qualifications
<ul>
<li>Experience in building Finite Element Models for jitter prediction.</li>
<li>Experience with Solar Arrays or other deployables.</li>
<li>Demonstrated capability to resolve vendor quality issues.</li>
<li>Expertise in conducting thermal analyses.</li>
<li>Expertise in weight optimization and structural efficiency.</li>
<li>Knowledge of failure modes and damage tolerance.</li>
<li>Experience with Agile development methodologies.</li>
<li>Familiarity with electronics assemblies, and harnessing.</li>
</ul>
Benefits
<ul>
<li>Flexible Time Off, Sick, Family &amp; Medical Leave.</li>
<li>Medical, Dental, Vision, Life, LTD, STD (employer funded)</li>
<li>Vol Life, Critical Illness, Accidental, Hospital Indemnity, Pet Insurance (employee funded)</li>
<li>401k with 3% non-elective company contribution</li>
<li>Stock Options</li>
<li>Free Parking</li>
<li>Free lunch in office daily</li>
</ul>
Umbra is an Equal Opportunity Employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by federal, state, or local law.
Employment Eligibility Verification
In compliance with federal laws, all hired persons will be required to verify their identity and eligibility to work in the United States by completing the required Employment Eligibility Verification Form (I-9 Form) upon hire.
ITAR/EAR Requirements
This position may include access to technology and/or data that is subject to U.S. export controls pursuant to ITAR and EAR. To comply with federal export controls, all persons hired must be a U.S. citizen, U.S. national, U.S. lawful permanent resident, refugee or asylee as defined by 8 U.S.C. § 1324b(a)(3), or must otherwise be eligible to obtain the required authorizations from the U.S. Department of State and/or U.S. Department of Commerce as applicable. 
Pay Transparency This job posting may cover multiple career levels. To ensure greater transparency, we provide base salary ranges for all roles, regardless of location. Our standard pay ranges are based on the role’s function and level, benchmarked against similar growth-stage companies. Compensation may vary based on geographical location, as certain regions may have different cost-of-living factors. The final offer will also be influenced by the candidate's skills, responsibilities, and relevant experience.
Compensation Range
The Compensation Range for this role is $170,000 - $220,000 DOE.

Staff Mechanical Engineer - Composites and Structures

<h3>Job Description</h3>
Job Description
CNC Mill Machine Operators needed for a medical device manufacturer located in Lake Forest, CA. Great opportunities with a stable company.
 
This company has a need form two (2) CNC Mill Machine Operators, 2nd Shift Job details are listed below. Mandatory, weekly overtime. Company has excellent benefits including 100% paid medical, dental and vision for employees. All positions have mandatory overtime and Saturday hours are 12:30 PM - 8:30 PM (must work at least 2 Saturdays per month). Company will complete a drug screen and background check prior to start.
 
CNC Mill: 2nd Shift
<ul>
<li>Temporary to Hire</li>
<li>Mandatory, weekly overtime</li>
<li>Pay: $17.50 -24/hr, depending on experience</li>
<li>2nd Shift, 2:30 PM - 10:45 PM, Monday - Friday plus 2 Saturdays a month.</li>
<li>Saturday hours are 12:30 PM - 8:30 PM.</li>
</ul>
 
Requirements:
<ul>
<li>MUST have at least 1 year of experience operating a CNC machine.</li>
<li>Must have basic mathematics ability for adding/subtracting decimals and fractions; must be able to read prints and understand dimensional tolerances.</li>
<li>Creativity, Initiative and the ability to work independently is a MUST.</li>
<li>Essential duties require frequent reaching above shoulder level and manual dexterity for handling small / large objects.</li>
</ul>

CNC Mill Machine Operator - 2nd Shift

<h3>Job Description</h3>
Job Description
Immediate Opportunity for a Mechanical Design Engineer (Contract Position)
Key Responsibilities
Working Schedule- 6:00 am-2:30 pm or 7:00 am-3:30 pm
Pay Rate:$35.00hr
Design &amp; Product Support
<ul>
<li>Design and Development: Lead the design, development, update, and ongoing support of current and new products, ensuring alignment with design specifications.</li>
<li>Technical Documentation: Create accurate and detailed piece part and assembly prints for internal use (manufacturing, assembly, quality control) and external quotation processes.</li>
<li>Bill of Materials (BOM) Management: Establish, edit, and maintain highly accurate Bills of Materials (BOMs), Part Numbers, and Routings within the ERP system to ensure production control accuracy.</li>
</ul>
Manufacturing &amp; Vendor Collaboration
<ul>
<li>Process Improvement: Proactively research and initiate ingenious manufacturing techniques to improve product quality, reduce costs, and enhance overall product designs.</li>
<li>Technical Liaison: Provide comprehensive technical support to all manufacturing departments, ensuring seamless production and assembly of parts and finished products.</li>
<li>Vendor Management: Communicate directly with vendors to secure quotations and ensure that designs are optimized for manufacturability and cost-effectiveness.</li>
</ul>
Cross-Functional &amp; Backup Support
<ul>
<li>Documentation Control: Assist in the creation, maintenance, proofing, and publishing of technical documents and product manuals.</li>
<li>Engineering Change Control: Provide backup support to Manufacturing and Purchasing by performing BOM revisions and updates, strictly adhering to ECR/ECN (Engineering Change Request/Notice) procedures, and managing drawing/specification control.</li>
<li>Marketing Support: Offer design-related support to Sales and Marketing, including assistance with graphics projects, marketing materials, and technical training manual content.</li>
</ul>
Qualifications and Requirements
Required
<ul>
<li>Education: Bachelor of Science Degree in an Engineering discipline. A combination of relevant experience and education may be considered in lieu of a Bachelor's degree.</li>
<li>Technical Proficiency: Proficient in SolidWorks for mechanical design, sheet metal design, basic wood cabinetry drafting, and file management. (Proficiency testing may be required).</li>
<li>Design Expertise: Demonstrated experience with sheet metal component and assembly design.</li>
<li>Software Skills: Fundamental understanding of PDM (Product Data Management) practices and proficiency in Microsoft Office Suite (Excel, Word, Outlook, PowerPoint).</li>
<li>Fabrication Knowledge: Strong working knowledge of wood and sheet metal fabrication techniques and tolerances.</li>
</ul>
Preferred (Highly Beneficial)
<ul>
<li>Experience with Syspro or similar BOM/MRP/ECO Accounting software.</li>
<li>Previous experience in cabinet design and/or electrical design, with knowledge of industry standards such as UL, CE, CSE, and NSF.</li>
<li>Expertise in wood cabinet design.</li>
<li>Bilingual proficiency (English/Spanish). A Plus!</li>
</ul>
Success Factors &amp; Desired Traits
The ideal candidate possesses a high degree of professionalism, integrity, and enthusiasm, and thrives in a dynamic manufacturing environment.
<ul>
<li>Self-Management: Self-starting and self-managing with the ability to handle diverse situations, anticipate challenges, and take proactive action to ensure success.</li>
<li>Problem-Solver: Capable of identifying creative and effective solutions to unique design and manufacturing challenges.</li>
<li>Communication: Excellent verbal and written communication skills for clear interaction with internal teams, vendors, and customers.</li>
<li>Drive &amp; Urgency: Demonstrates an extreme sense of urgency with a hands-on approach and a willingness to jump in and get things done.</li>
<li>Adaptability: Possesses the flexibility and willingness to adapt to a rapidly changing environment and embrace new challenges.</li>
<li>Teamwork: A dedicated team player with the ability to efficiently manage time and resources while upholding high professional standards.</li>
</ul>
Accountability
Success in this role will be measured by the individual's ability to solve complex problems and the resulting impact on cross-departmental goal achievement. The Mechanical Design Engineer is directly accountable for ensuring all Bills of Materials, Work Order Routings, and Drawing packages maintain the highest level of accuracy and quality.
Company DescriptionAt United Employment Solutions, we have a supportive and collaborative work environment where your contributions are valued, alongside opportunities for advancement and competitive benefits. Together, we uphold a culture of innovation, diversity, and excellence, making a meaningful impact in our industry and beyond. Join us in shaping the future of staffing by creating a reliable and qualified workforce. 
<h3>Company Description</h3>
At United Employment Solutions, we have a supportive and collaborative work environment where your contributions are valued, alongside opportunities for advancement and competitive benefits. Together, we uphold a culture of innovation, diversity, and excellence, making a meaningful impact in our industry and beyond. Join us in shaping the future of staffing by creating a reliable and qualified workforce.

Mechanical Design Engineer

<h3>Job Description</h3>
Job Description
Umbra is an American space technology company delivering advanced systems, from sensors to spacecraft, that empower customers worldwide with unmatched access to critical information from space. Our mission is simple and ambitious: redefine space—for people, systems, and missions in every domain. Umbra’s ecosystem operates through three business units: Remote Sensing (the data), Space Systems (the components), and Mission Solutions (the platforms).Together, our teams develop capabilities that deliver persistent access, resilient performance, and mission-ready solutions, advancing U.S. space leadership while keeping the world safe and informed. 
About the Team
Space Systems – The Components
Space Systems is where Umbra turns hardware and software designs into on-orbit realities; developing, implementing and iterating mission-ready core technology, while simultaneously advancing the next generation of our own satellite constellation. Space Systems is vertically integrated across the satellite architecture, thus the team designs, builds, and tests an array of critical components and subsystems, including power systems, communications, control systems, deployment hardware, avionics, and payloads, as well as the flight software, firmware and digital design solutions to support the entire hardware stack. Our focus is on first principles engineering, and our mandate is simple: it has to work when it counts. Every bolt, board, and binary is proven on our own SAR constellation, ensuring flight-proven reliability where failure is not an option. 
If you want to work on cutting edge space technology while maintaining the highest standard for innovation and mission ready performance, you belong here at Umbra.
About the Job
We are looking for a highly skilled and motivated professional to become an integral part of our dynamic and multidisciplinary Space Systems engineering team as a Staff Mechanical Engineer. In this position, you will have the opportunity to contribute significantly to the design and development of innovative, next-generation space systems and mechanisms. The ideal candidate will possess a deep passion for designing, prototyping, building, and testing hardware, as well as demonstrable expertise in the area of rotating machinery. 
This position is based on-site in our Santa Barbara, CA office.
Requirements
Key Responsibilities
<ul>
<li>Design and analyze spacecraft mechanisms, including:</li>
<ul>
<li>Collaborate with cross-functional teams to derive and refine requirements.</li>
<li>Create motorization budgets. </li>
<li>Perform detailed design and component selection for encoders and signal routing/cable management.</li>
<li>Design for launch loads and stow/release behavior.</li>
<li>Create pointing budgets accounting for on-orbit behaviors. </li>
</ul>
<li>Work closely with the Chief Engineer and Systems Architects to optimize designs for performance and manufacturability.</li>
<li>Create detailed design documentation, including drawings, design guides, and Interface Control Documents (ICDs).</li>
<li>Own the design through the full build and test lifecycle, including:</li>
<ul>
<li>Conduct Qualification campaigns. </li>
<li>Develop test plans and equipment selection for verification of torque and torque margin and open loop and closed loop pointing performance. </li>
<li>Verify as built performance over temperature and in the presence of base disturbance.</li>
</ul>
<li>Develop and execute work instructions, test plans, and test reports.</li>
<li>Partner with technicians and manufacturing engineers to troubleshoot and resolve hardware issues.</li>
<li>Provide mechanical engineering support to other engineering teams as needed.</li>
<li>Occasionally support launch and test campaigns outside regular hours, including evenings and weekends.</li>
<li>Perform other duties as required.</li>
</ul>
Required Qualifications
<ul>
<li>Bachelor's degree in Mechanical. Aerospace Engineering, or a related field.</li>
<li>10-15+ years of professional experience in mechanical engineering, specializing in motor-driven mechanisms for spacecraft power or payload systems.</li>
<li>Strong multidisciplinary understanding of mechanisms and mechanical systems.</li>
<li>Hands-on experience in manufacturing and assembling parts using various methods and standards.</li>
<li>Proficiency in CAD software, with experience in design and drafting to ASME Y14.5 standards.</li>
<li>Expertise in first principles analysis, including hand calculations and Finite Element Analysis (FEA).</li>
<li>Excellent problem-solving skills, with the ability to independently research, diagnose, and clearly explain technical challenges and solutions.</li>
<li>A strong desire to thrive in a fast-paced, highly collaborative team environment.</li>
</ul>
Desired Qualifications
<ul>
<li>Experience with thermal analysis.</li>
<li>Experience interfacing with RF systems and associated EMI/EMC practices.</li>
<li>Experience with closed loop motor-encoder automation in lab or on-orbit.</li>
<li>Expertise in pointing, acquisition and tracking.</li>
<li>Experience with Agile development methodologies.</li>
<li>Familiarity with electronics assemblies, and harnessing.</li>
</ul>
Benefits
<ul>
<li>Flexible Time Off, Sick, Family &amp; Medical Leave.</li>
<li>Medical, Dental, Vision, Life, LTD, STD (employer funded).</li>
<li>Vol Life, Critical Illness, Accidental, Hospital Indemnity, Pet Insurance (employee funded).</li>
<li>401k with 3% non-elective company contribution.</li>
<li>Stock Options.</li>
<li>Free Parking.</li>
<li>Free lunch in office daily.</li>
</ul>
Umbra is an Equal Opportunity Employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by federal, state, or local law.
Employment Eligibility Verification
In compliance with federal laws, all hired persons will be required to verify their identity and eligibility to work in the United States by completing the required Employment Eligibility Verification Form (I-9 Form) upon hire.
ITAR/EAR Requirements
This position may include access to technology and/or data that is subject to U.S. export controls pursuant to ITAR and EAR. To comply with federal export controls, all persons hired must be a U.S. citizen, U.S. national, U.S. lawful permanent resident, refugee or asylee as defined by 8 U.S.C. § 1324b(a)(3), or must otherwise be eligible to obtain the required authorizations from the U.S. Department of State and/or U.S. Department of Commerce as applicable. 
Pay Transparency This job posting may cover multiple career levels. To ensure greater transparency, we provide base salary ranges for all roles, regardless of location. Our standard pay ranges are based on the role’s function and level, benchmarked against similar growth-stage companies. Compensation may vary based on geographical location, as certain regions may have different cost-of-living factors. The final offer will also be influenced by the candidate's skills, responsibilities, and relevant experience.
Compensation Range
The Compensation Range for this role is $170,000 - $220,000 DOE.

Staff Mechanical Engineer - Mechanisms and Deployables

<h3>Job Description</h3>
Job DescriptionMachine Learning Engineer in Los Angeles, CA. Opportunity! This Jobot Consulting Job is hosted by: Robert Reyes Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $120,000 - $180,000 per year 
A bit about us:
 Prestige Hospital System Placed #1 in both California in a broad assessment of excellence in hospital-based patient care. 
Why join us?
 Competitive Salary$$ Stellar Benefits (Medical, Dental Vision, Life Insurance) Flexible Schedule Job Stability Career growth The position offers a competitive salary If you are passionate, thrive in a fast-paced environment and are ready to take your career to the next level, we would love to hear from you. 
Job Details
 Job Details: We are seeking a dynamic and innovative Consulting Machine Learning Engineer to join our Tech Services team. The successful candidate will be responsible for the full lifecycle management of machine learning models, including design, build, and maintenance. As an MLOps Engineer, you will play an integral role in implementing artificial intelligence solutions across our organization. You will partner with data scientists, data team members, and clinical operations to deploy, monitor, and maintain machine learning solutions that will improve operational efficiency and advance research. Responsibilities: 
<ul>
<li> Deploying and maintaining production-grade machine learning models, ensuring real-time inference, scalability, and reliability.</li>
<li> Developing end-to-end scalable ML infrastructures using on-premise cloud platforms such as AWS, GCP, or Azure.</li>
<li> Leading engineering efforts in creating and implementing methods and workflows for ML/GenAI model engineering, LLM advancements, and optimizing deployment frameworks.</li>
<li> Developing AI pipelines for various data processing needs, ensuring solutions meet all technical and business requirements.</li>
<li> Collaborating with data scientists, data engineers, analytics teams, and DevOps teams to design and implement robust deployment pipelines.</li>
<li> Implementing and optimizing CI/CD pipelines for machine learning models, automating testing and deployment processes.</li>
<li> Setting up monitoring and logging solutions to track model performance, system health, and anomalies.</li>
<li> Implementing version control systems for machine learning models and associated code.</li>
<li> Ensuring machine learning systems meet security and compliance standards, including data protection and privacy regulations.</li>
<li> Maintaining clear and comprehensive documentation of ML Ops processes and configurations.</li>
</ul>
 Qualifications: 
<ul>
<li> Bachelor’s degree in computer science, artificial intelligence, informatics or closely related field. Master’s degree in computer science, engineering or closely related field.</li>
<li> Minimum of 3 years relevant Machine Learning Engineer Experience.</li>
<li> Experience with AI and machine learning platforms (e.g., AWS, Azure or GCP).</li>
<li> Proficiency in containerization technologies (e.g., Docker) or container orchestration platforms (e.g., Kubernetes).</li>
<li> Experience with CI/CD tools (e.g., Github Actions).</li>
<li> Proficiency in programming languages and frameworks (e.g., Python, R, SQL).</li>
<li> Deep understanding of coding, architecture, and deployment processes.</li>
<li> Strong understanding of critical performance metrics.</li>
<li> Extensive experience in predictive modeling, LLMs, and NLP.</li>
<li> Understanding of healthcare regulations and standards, and familiarity with Electronic Health Records (EHR) systems.</li>
<li> Experience in managing end-to-end ML lifecycle and automation with Terraform is a must.</li>
<li> Ability to effectively articulate the advantages and applications of the RAG framework with LLMs.</li>
</ul>
 Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.

Machine Learning Engineer

<h3>Job Description</h3>
Job DescriptionCNC Machinist Job Title: CNC Machinist Location: Anaheim, CA Hourly Rate: $25.00 - $38.00 We are a leader in the aerospace manufacturing industry and have provided our customers with innovative, high-quality products for over 50 years. We are seeking a machinist with experience with CNC programming, vertical milling, &amp; lathes to join our growing organization in Anaheim, CA. If that sounds like you, let's connect!&nbsp;
What You Will Be Doing
<ul>
<li>Setups and production on CNC 3 and 5-axis Mills and Lathes.&nbsp;</li>
<li>Work from prints, 3D CAD models, and setup sheets for multiple operations.</li>
<li>Inspect finished parts to ensure company quality standards (-/+ .0005).</li>
<li>Troubleshoot and manually adjust to maintain specific tolerances.</li>
</ul>
What You Need for this Position
<ul>
<li>Minimum 3 years of CNC machining experience.</li>
<li>Operation and programming proficiency in Haas 3 and 5 Axis milling machines and Lathes.</li>
<li>Experience with MasterCAM X7 or higher (MasterCAM certificate a plus but not required).</li>
<li>Solidworks proficiency (2013 or higher).</li>
<li>Utilization of tools such as micrometers, calipers, and edge finders.</li>
<li>Strong problem-solving skills.</li>
<li>Clean and organized workstation maintenance.</li>
<li>Ability to multitask in a shop environment.</li>
</ul>
Benefits
<ul>
<li>Health insurance.</li>
<li>Dental insurance.</li>
<li>Paid time off.</li>
<li>Paid holidays.</li>
<li>401k offerings.</li>
<li>&amp; other great benefits!</li>
</ul>
 - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 09/15/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. &nbsp;CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at <a href="mailto:Benefits@CyberCoders.com" target="_blank">Benefits@CyberCoders.com</a> to make arrangements.

CNC Machinist

<h3>Job Description</h3>
Job DescriptionMaintenance Technician (3rd Shift) - Food Manufacturing
Title:&nbsp;Maintenance Technician - Food Manufacturing&nbsp;(ASEPTIC) Location: Viisalia, CA (93292) &nbsp; &nbsp; Relocation Assistance Available for the right candidate!&nbsp; Hourly: $31-$45 (Shift Difference)
Working Hours: 10PM-6:30AM
What You Will Be Doing
<ul>
<li>Troubleshoot &amp; maintain plant machinery i.e. mixers, conveyors, compressors, motors &amp; pumps</li>
<li>Troubleshoot or replace electrical control devices i.e. switches, photo eyes, proximity sensors, pushbuttons, contactors, motor starters as needed</li>
<li>Troubleshoot or replace hydraulic, pneumatic &amp; basic electrical power components</li>
<li>Troubleshoot &amp; repair equipment by utilizing PLCs (Allen Bradley) &amp; other multiple automated control systems</li>
<li>Use RS Logix &amp; the ability to read ladder logic</li>
<li>Perform work order repairs, inspections &amp; adjustments along with/ preventative maintenance</li>
<li>Work closely with/ production &amp; refrigeration personnel to resolve plant &amp; process problems</li>
<li>Assist management in developing SOPs &amp; duty cycles for repairs &amp; maintenance</li>
<li>Interpret specifications, schematics, operating &amp; maintenance manuals&nbsp;</li>
</ul>
What You Need for this Position
<ul>
<li>5+ years as a Maintenance Technician (ideally in the food &amp; beverage manufacturing space)</li>
<li>Strong experience with ASEPTIC PROCESSING</li>
<li>Experience using electrical meters, maintenance tools &amp; MS Office</li>
<li>Electrical, PLC, pneumatic &amp; mechanical skillset</li>
</ul>
What's In It for You
Full Benefits Package&nbsp;(Medical, Dental, Vision, Life, LTD/STD, 401k w/ matching) and more!
IF interested, can you provide an updated resume &amp; hourly pay requirements to&nbsp;<a href="mailto:KELLY.TAYLOR@CYBERCODERS.COM" target="_blank">KELLY.TAYLOR@CYBERCODERS.COM</a>
 - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 08/20/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. &nbsp;CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at <a href="mailto:Benefits@CyberCoders.com" target="_blank">Benefits@CyberCoders.com</a> to make arrangements.

Maintenance Technician (3rd Shift) - Food Manufacturing

<h3>Job Description</h3>
Job DescriptionPLC Extrusion Engineer
Title: PLC Extrusion Engineer
Location: Corona, CA Position Overview The PLC Extrusion Engineer is responsible for designing, developing, and optimizing extrusion processes and systems. This role involves working with PLC programming, automation systems, and CAD software to ensure efficient and effective production processes. The ideal candidate will leverage their expertise in engineering and automation to enhance production quality and efficiency. Key Responsibilities
<ul>
<li>Design and optimize extrusion processes and equipment.</li>
<li>Develop and troubleshoot PLC programs for extrusion machinery.</li>
<li>Collaborate with cross-functional teams to implement automation solutions.</li>
<li>Utilize AutoCAD and SolidWorks for designing and modeling extrusion systems.</li>
<li>Conduct testing and validation of extrusion processes to ensure quality standards are met.</li>
<li>Provide technical support and training to production staff related to extrusion operations.</li>
</ul>
Qualifications
<ul>
<li>Bachelor's degree in Mechanical Engineering, Electrical Engineering, or related field.</li>
<li>Experience in PLC programming and automation systems.</li>
<li>Proficiency in AutoCAD and SolidWorks for design and modeling.</li>
<li>Strong problem-solving skills and attention to detail.</li>
<li>Ability to work collaboratively in a team environment.</li>
</ul>
Benefits
<ul>
<li>
401(k)&nbsp;
</li>
<li>
Dental insurance&nbsp;
</li>
<li>
Health insurance&nbsp;
</li>
<li>
Paid time off&nbsp;
</li>
</ul>
 - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 09/29/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. &nbsp;CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at <a href="mailto:Benefits@CyberCoders.com" target="_blank">Benefits@CyberCoders.com</a> to make arrangements.

13,633 Manufacturing Jobs