field_job_occupational_field_parents_all

field_job_employment_type

job_organization_name

city

state

<h3>Job Description</h3>
Job Description
We’re hiring a skilled&nbsp;Kitchen Fire Suppression Technician&nbsp;with both Inspection, Testing, and Maintenance (ITM) and Installation experience.
You’ll service commercial kitchen fire suppression systems for restaurants, schools, hospitals, and facilities across Southern California.
Experience with&nbsp;ANSUL, PyroChem, Amerex, Range Guard, Badger/Kidde, or similar systems required.
Having a CAL Fire (Fire Extinguisher license)/card is a major plus.
What You’ll Do
Perform inspection, testing, and maintenance (ITM) per NFPA 10, NFPA 17A, NFPA 96, and local AHJ codes.
Install and retrofit pre-engineered kitchen systems (pull stations, nozzles, agent tanks, detection lines, etc.).
Diagnose and repair system issues.
Complete service documentation using company software (photos, notes, signatures).
Coordinate with customers to minimize downtime during service or installations.
Fire extinguisher service when needed if licensed.
Minimum Requirements
2+ year’s experience servicing commercial kitchen fire suppression systems.
Hands-on with ANSUL, PyroChem, Amerex, Range Guard, and Badger/Kidde systems.
Valid California driver’s license with clean record.
Ability to lift 50 lbs, climb ladders, and work in kitchen environments.
Professional appearance and customer service focus.
Preferred Qualifications
Current Cal Fire Certificate of Registration license/card.
Experience with fuel/gas/electric shut-off and fire alarm tie in.
Experience with chain restaurants, hospitals, and school districts.

Kitchen Fire Suppression Technician

<h3>Job Description</h3>
Job Description
**Elevate your career in sunny San Jose, California, with a fantastic new role—Relocation assistance is available for the ideal US-based candidate**
Director of Quality - Full-time / Permanent
Location - Onsite - San Jose, CA - relocation supported
Salaried | $209k - $230K with Bonus and Benefits
About Us: Vantedge Medical is the premier metals-based med-tech solutions partner from concept to full-scale manufacturing. We are at the forefront of precision engineering and innovation, specializing in the development and manufacturing of vital components for medical markets such as Robotic Assisted Surgery, Orthopedics, Surgical Instruments, Dental, and more. Our teams work in unison, collaborating and problem-solving to serve the manufacturing needs of the top Medical Original Equipment Manufacturers (OEMs) around the globe. Making a difference in the lives of patients and their families drives us to go above and beyond every day. With a steadfast commitment to advancing medical technology, we take immense pride in the work we do – and have a lot of fun doing it
About the Role: The Director of Quality will effectively lead the quality organization by overseeing all Quality Assurance efforts within the Vantedge Medical California Manufacturing locations. Working in conjunction with the Vice President of Quality and Regulatory, this role will support the quality goals and quality metrics for the California sites. The Director of Quality develops and executes the company's process control systems. They drive and monitor the implementation process of these systems and the successful implementation and sustainment of the quality systems in support of various production and development programs (New Product Introduction). The Director of Quality reports to the Vice President of Quality and Regulatory for Vantedge Medical.
Responsibilities:
<ul>
<li>This role is responsible for setting the QA policies and ensuring the departments meet customer requirements.</li>
<li>Take the lead responsibility for significant quality issues. Be “hands on” with the issue, develop a plan to resolve the issue, communicate the plan and progress on the plan to the site Senior Leadership team, organization, and Vice President of Quality and Regulatory.</li>
<li>Participate and support the Customer Focus Business Units (CFBU) as required and take an active role in customer meetings.</li>
<li>Maintain and review cost of poor quality (COPQ) and total cost of quality (TCOQ) including internal and external failure costs. Maintain budgetary control over the Quality Assurance function.</li>
<li>Lead and manage the Quality Department ensuring achievement of department and Company’s goals, objectives, adherence to expense budgets, and effective staffing and planning.</li>
<li>Monitor customer feedback and corrective actions and make improvements to improve the quality systems based on this feedback.</li>
<li>Analyze and evaluate quality and reliability capabilities of potential and existing suppliers, as applicable through site visits, audits, surveys and/or data analysis. Develop and maintain oversight of the supplier quality index to ensure only high-quality suppliers are retained and or put on a corrective action plan, as applicable.</li>
<li>Have overall responsibility of the Material Review Board (MRB) process. Establish key metrics to analyze and monitor performance to achieve site level goals.</li>
<li>Provide the leadership necessary to establish a proactive culture through effective use of goal setting, team building, employee empowerment, succession planning and communication.</li>
<li>Identify and solve bottlenecks in the incoming, in-process, CMM, metrology, and outgoing inspection processes. This analysis will pertain to headcount, equipment, operating hours and/or other capacity constraints.</li>
<li>Provide an executive overview of all product schedules and network timelines through effective communication and project management techniques.</li>
<li>Develop Product Quality Plans as appropriate.</li>
<li>Provide periodic management reports of key QMS indicators. Lead periodic Management Reviews.</li>
<li>Working and collaborating with the site managers, lead the development and continual improvement of the internal auditing program with a goal for continuous internal and external audit readiness.</li>
<li>Primary responsibility for product conformance to customer expectations.</li>
<li>Ensure the promotion of awareness of regulatory and customer requirements throughout the organization.</li>
</ul>
Requirements
<ul>
<li>Bachelor’s degree.</li>
<li>8 years of progressively responsible management experience.</li>
<li>Must have strong hands-on knowledge of the fundamentals of QMS.</li>
<li>Strong communication and interpersonal skills are essential, most importantly strong team building skills within a rapidly growing environment.</li>
<li>Must be comfortable working with a strong management team and able to positively influence the group when necessary.</li>
<li>Ability to professionally represent the company when collaborating with external organizations and regulatory bodies.</li>
<li>Independent, detail-oriented, creative, tenacious, flexibility and a team player are essential characteristics.</li>
<li>Demonstrated PFMEA, Process Qualification and Validation expertise.</li>
<li>Strong knowledge of ISO13485 is required.</li>
<li>Knowledge of ISO9001 and/or 21CFR Part 820 is desired.</li>
<li>Travel: Minimal</li>
</ul>
Benefits:
<ul>
<li>Medical – Dental – Vision – Life Insurance</li>
<li>Vacation and Sick Pay</li>
<li>401k</li>
</ul>
Company DescriptionVantedge Medical is a proven partner to Medical Technology OEMs. For more than 40 years, we have been manufacturing a full suite of expert-level solutions from complex machining and stamping to the manufacturing of complete assemblies for growing markets including Robotic Assisted Surgery (RAS), Orthopedics, Surgical Instruments and Components, Dental implants, and more. Vantedge Medical’s seasoned professionals shorten global supply chains while improving value for our many OEM partners. As a mature Development &amp; Manufacturing Organization, our teams specialize in Electromechanical Assembly, Precision Machining, Sheet Metal Fabrication, and Rapid Prototyping &amp; Engineering Solutions. Our 550,000+ sq. ft. of combined manufacturing space offers a broad spectrum of manufacturing capabilities and flexibility for most levels of mechanical integration. 
<h3>Company Description</h3>
Vantedge Medical is a proven partner to Medical Technology OEMs. For more than 40 years, we have been manufacturing a full suite of expert-level solutions from complex machining and stamping to the manufacturing of complete assemblies for growing markets including Robotic Assisted Surgery (RAS), Orthopedics, Surgical Instruments and Components, Dental implants, and more.\r\n\r\nVantedge Medical’s seasoned professionals shorten global supply chains while improving value for our many OEM partners. As a mature Development &amp; Manufacturing Organization, our teams specialize in Electromechanical Assembly, Precision Machining, Sheet Metal Fabrication, and Rapid Prototyping &amp; Engineering Solutions. Our 550,000+ sq. ft. of combined manufacturing space offers a broad spectrum of manufacturing capabilities and flexibility for most levels of mechanical integration.

Director of Quality

<h3>Job Description</h3>
Job DescriptionCNC Machine shop seeking a CNC Lathe Setup Machinist. Individual will be responsible for: -CNC setup on Mori Seiki &amp; Okuma lathe machines -Setup and run through first article -Operate machines for production -Troubleshoot as needed &nbsp;We provide CNC machining services to customers in the Aerospace, Medical and Commercial industries. From prototype to production, aluminum to titanium, we work with various quantities and materials. Position is full-time, Monday-Friday, from 6:30a-3:00p. Individual must be able to: -Work with Okuma (OSP) and Mori Seiki controls (Fanuc) -Setup 1-2 machines a day, operate machines when setups complete -Bore jaws or collets as needed using MDI programming -Work with live tooling -Work independently -Follow directions/job traveler information -Adhere to ISO9001/AS9100 standards and practices.

CNC Lathe Setup Machinist

<h3>Job Description</h3>
Job DescriptionThe SMT Touch-Up &amp; Rework Technician is responsible for performing various duties within the SMT assembly area in accordance with established procedures and work instructions. ·&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Precision Soldering on PCBAs ·&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;The Operator must be able to interpret drawings, bills of material, manuals and other work instructions. ·&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Must work safely to prevent on-the-job injuries, this includes wearing personal protective equipment such as safety glasses. ·&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Detects malfunctions of the assembly equipment through visual and audio ques. ·&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Communicates with the Senior Technician and QC personnel to resolve quality issues. ·&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Makes appropriate entries into Travelers, Time Standards and the Work Order Document Package. ·&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Maintains traceability of product. Preferred, but not Required 
<ul>
<li>2-Years experience Soldering Electronic Components for PCBAs</li>
<li>IPC 610 trained</li>
<li>JEDEC J-STD-001 trained</li>
<li>Extra IPC standards knowledge is a plus</li>
<li>Familiar with ESD / MSL requirements for components and PCB/PCBAs</li>
</ul>

SMT Technician (Soldering)

<h3>Job Description</h3>
Job Description
Waev Inc. is an electric mobility OEM founded in 2021 to manufacture, distribute, market, and support the GEM, Taylor-Dunn and Tiger brands. GEM was the first commercially-produced, street-legal low-speed vehicle in the United States. GEMs shuttle people and goods across city centers, residential communities, government campuses, colleges and universities, and other micro-environments. Founded in 1949, Taylor-Dunn burden carriers, personnel carriers, and stockchasers have been trusted solutions in a broad range of commercial environments and provide premium reliability, safety features, and all-electric efficiency for industrial grade applications. Tiger heavy-duty tow tractors have been towing cargo, baggage, parcel, and other equipment in ground support applications since 1981. Waev's headquarters and factory are located in Anaheim, California.
JOB SUMMARY:
Ensures all fabricated parts conform to engineering specifications. Operates automatic and cold saws, drilling and milling equipment, press brakes,benders, notchers, ironworkers, sheet metal shears, and BLM and Trumpf lasers.
ESSENTIAL DUTIES &amp; RESPONSIBILITIES:
<ul>
<li>Follow all company safety rules, policies and procedures </li>
<li>Operate and maintain machines in the fabrication area, including automatic and cold saws, drilling/milling machines, press brakes, benders, notchers, ironworkers, sheet metal shears, and BLM and Trumpf lasers.</li>
<li>Ability to read/interpret blueprint engineering drawings</li>
<li>Keep machines and work area clean and organized daily</li>
<li>Move completed work orders in MES system </li>
</ul>
SKILLS, KNOWLEDGE &amp; EDUCATION:
<ul>
<li>Min 1 years' hands shop experience in operating press brakes, saws, ironworker, bender, sheet metal shear preferred</li>
<li>Automatic and cold saw operation preferred</li>
<li>High school diploma/GED or equivalent required.</li>
</ul>
PHYSICAL DEMANDS:
<ul>
<li>May have exposure to loud noise levels, dust, fumes, and chemicals.</li>
<li>Requires extensive use of the eyes and firm grasping and/or fine manipulation using both hands.</li>
<li>Must be able to lift 40lbs, bend, twist, turn, kneel, squat, reach overhead, perform strong pinch and grip, and stand/walk up to 8 hours or more per day.</li>
</ul>
EEO STATEMENT Waev Inc is an Equal Opportunity Employer and will make all employment-related decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, marital status, familial status, status with regard to public assistance, membership or activity in a local commission, protected veteran status, or any other status protected by applicable law.

Metal Fabrication Saw Operator

<h3>Job Description</h3>
Job DescriptionSalary: $33.86 - $43.22* 
*Starting wage negotiable
 
The Instrument &amp; Maintenance Technician III is an experienced level position requiring a large degree of independent initiative and judgment. The position works under general supervision performing assigned tasks and assures that the District buildings, facilities, and grounds are kept in good repair. Assigned tasks also include but are not limited to electrical system repairs and installations; District building and infrastructure maintenance; fabrication of irrigation structures and appurtenances; assisting with the installation and maintenance of the SCADA system; and performing related work as required. Incumbents will go through FIDs Core Values training and consistently demonstrate FID Core Values respective to the training received.
This is a position reporting to the Shop Supervisor.
This position is considered safety-sensitive and, therefore, is included in the random drug screening program.
SUPERVISION EXERCISED:
This position does not supervise. However, all employees have responsibility to orientate, train, and assist employees of lower-level classifications.
EXAMPLES OF INSPECTOR DUTIES:
The duties listed below represent the various types of work and essential functions that may be performed. The omission of specific statements of duties does not exclude them if the work is related or a logical assignment to this class.
<ul>
<li>Troubleshoot electrical system problems and calibration.</li>
<li>Perform wiring and cabling for electrical and data systems.</li>
<li>Inspect Fresno Irrigation District owned buildings and grounds on a regular basis.</li>
<li>Evaluate the need for repairs or replacement of the facility structures.</li>
<li>Perform general construction and maintenance tasks.</li>
<li>Repair equipment such as HVAC systems or may recommend to supervisor to contract with an outside vendor to perform repairs.</li>
<li>Repair plumbing and sprinkler systems or may recommend to supervisor to contract with an outside vendor to perform repairs.</li>
<li>Design and fabricate board lockers, board guides and locks, water control gates (manual, hydraulic, and electric actuated), stilling wells, flap gates, long crested weirs, catwalks, trash rakes, structure covers.</li>
<li>Install and maintain board lockers, board guides and locks, water control gates (manual, hydraulic, and electric actuated), stilling wells, flap gates, long crested weirs, catwalks, trash rakes, structure covers, pumps, automatic trash racks, automatic gates</li>
<li>Install and maintain the mechanical and electrical aspects of the SCADA/Telemetry system including but not limited to automatic gates, flow meters, stilling wells, level sensors, staff gauges, automated trash rack, trash rakes, radios, PLCs, and other electrical equipment.</li>
<li>Repair a variety of electrical hand tools drills, saws, etc.</li>
<li>Respond to emergencies and breakdown of SCADA/telemetry systems, water control devices.</li>
<li>Weld or perform repairs on mobile equipment in the field and in the shop.</li>
<li>Inspect, maintain, repair, and advise on contracted repairs to pumps, automatic gates, propeller meters and automatic trash racks.</li>
<li>Oversee building maintenance projects.</li>
<li>Prepare specifications for contractor proposal requests.</li>
<li>Keep records of designs, repairs and maintenance.</li>
<li>May be assigned to work with construction and maintenance crews.</li>
<li>May be assigned special projects.</li>
<li>Perform other duties as assigned.</li>
</ul>
EMPLOYMENT STANDARDS:
Education, Experience, Licensing and Certificates:
Any combination of experience and education that would likely provide the required knowledge and abilities is qualifying. A typical way to obtain knowledge and abilities would be: 

Grade I Apprentice level position. Under the guidance of an experienced colleague, this apprenticeship offers specialized training through on-the-job training. This role involves tasks such as learning and adhering to workplace procedures, following health and safety guidance, completing tasks to gain the qualification to move up in grade. Exposed to a diverse range of tasks to develop the skills and abilities necessary to function independently at higher grade levels. Will assist with documenting standard operating procedures for a variety of tasks and activities.
Consistently demonstrates self-motivation and proactively looks for potential problems and designs successful solutions. May require supervision for most tasks. This grade requires a minimum of two (2) years of full time, paid work experience successfully installing, maintaining, and repairing electrical equipment, wiring, and systems, with a preference of working with high voltage (480) in an industrial setting. In addition, successful completion of the following classes:
<ul>
<li>Fresno City College courses
<ul>
<li>Maintenance Mechanic MMCTC-372 Electrical Fundamentals, or approved equivalent</li>
</ul>
</li>
</ul>
<ul>
<li>Cal Poly Irrigation Training and Research Center (ITRC) short courses:
<ul>
<li>Supervisory Control and Data Acquisition (SCADA) Basics</li>
<li>Advanced SCADA for Technicians</li>
</ul>
</li>
</ul>
Grade II Meets all Grade I qualifications. Operates under limited Supervision. This grade requires a minimum of six (6) years of full time, paid work experience successfully installing, maintaining, and repairing electrical equipment, wiring, and systems up to and including working with high voltage (480) in an industrial setting. Has a proven track record of efficient completion of tasks, and ability to complete projects with and without other staff members, exhibits a high level of quality control over work product. Well-rounded experience in HVAC maintenance, fabrication and welding, plumbing, and general building maintenance, and has the proven ability to teach others and consistently offers expertise to others in the organization. Engages in continuous learning and stays up to date with best practices and changing technology.
Grade III Meets all Grade II qualifications. Does not require any supervision. In addition, this grade requires a minimum of eight (8) years of full time, paid work experience successfully installing, maintaining, and repairing electrical equipment, wiring, and systems up to and including 480 volts in an industrial setting. Must demonstrate excellent independent competence across entire range of duties and responsibilities assigned to this job position.
Licenses and Certificates
Driving is an essential function of this position. Possession of a valid California class C drivers license may be required at the time of appointment. Failure to obtain or maintain such required license(s) may be cause for disciplinary action. Individuals who do not meet this requirement due to physical disability will be considered for accommodation on a case-by-case basis.
Possession and proof of a good driving record as evidenced by freedom from multiple or serious traffic violations or accidents for at least two (2) years duration. The driving record will not contribute to an increase in the Districts automobile insurance rates.
Knowledge and understanding of:
<ul>
<li>Electrical wiring and components.</li>
<li>Blueprints and schematic diagrams.</li>
<li>Electricity, hydraulics, pumps, physics, schematics, and welding.</li>
<li>Safe working practices.</li>
<li>Basic math.</li>
<li>Correct English usage, grammar, spelling, punctuation, and vocabulary.</li>
<li>General construction and maintenance methods.</li>
<li>Basic hydraulics and water flow; simple mechanical principles; various types of water gates, control structures, and turnouts.</li>
<li>Operation and use of the Fresno Irrigation District water distribution system.</li>
<li>Operations of plumbing, sprinkler, and HVAC systems.</li>
<li>Landscape and garden maintenance.</li>
<li>Voice and data cabling.</li>
<li>Hand tools and small power tools.</li>
<li>Basic vehicle and mobile equipment repair.</li>
</ul>
Ability to:
<ul>
<li>Install, maintain, replace, and repair electrical equipment, including telemetry and automatic gate systems.</li>
<li>Wire and rewire electrical equipment.</li>
<li>Determine methods and work with high and low voltage safely.</li>
<li>Read and interpret blueprints, schematics, and other diagrams.</li>
<li>Fabricate structures using appropriate welding and construction techniques.</li>
<li>Instruct, train, and oversee others assisting in installation, fabrication, maintenance, and repairs of a variety of equipment and structures.</li>
<li>Work and drive safely.</li>
<li>Diagnose and determine whether the equipment can be repaired or requires replacement.</li>
<li>Keep thorough, legible, and accurate records.</li>
<li>Plan, organize, evaluate, and perform building and facility maintenance and repair.</li>
<li>Plan, organize, evaluate, and perform grounds upkeep.</li>
<li>Maintain and repair equipment associated with building and grounds upkeep.</li>
<li>Maintain and repair equipment in the field.</li>
<li>Work in confined spaces</li>
<li>Swim.</li>
</ul>
Physical and Mental Standards
The physical and mental demands described here are representative of those that must be met by employees to successfully perform the essential functions of this class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
<ul>
<li>Operates District vehicles, equipment, and tools used in construction, maintenance, and repair work.</li>
<li>Must be able to push, pull, reach, and lift equipment and parts weighing up to fifty (50) pounds.</li>
<li>Stoops, kneels, crouches, crawls, and climbs during maintenance and repair work.</li>
<li>Works in an environment with exposure to dust, dirt, sharp objects, human waste, and/or weed abatement chemicals.</li>
<li>Works in an environment with temperature changes between heat and cold.</li>
<li>Communicates orally with District staff in face-to-face, one-on-one settings.</li>
<li>Regularly uses a telephone for communication.</li>
<li>May sit or stand or walk on uneven terrain for extended time periods.</li>
</ul>
Other Conditions of Employment:
<ul>
<li>Employee will follow all safety rules.</li>
<li>Employee will observe and follow all District policies and regulations.</li>
<li>Employee will report to work at the appointed time for each day he or she is scheduled to work.</li>
<li>During paid work time, employee will perform all work tasks and responsibilities to the best of his or her ability with the focus on quality and timely completion.</li>
<li>Employee will work cooperatively with co-workers and supervisors.</li>
<li>Employee will represent the District in a positive and professional manner at all times.</li>
</ul>

Electric Instrument & Maintenance Technician III

<h3>Job Description</h3>
Job Description 
Why Join Our Team?
Do you want to be part of a team that is making a positive difference in lives across the globe? Do you want to be part of a culture where you are recognized, respected, and rewarded for a job well done? U.S. Pipe has been providing quality water and wastewater products since 1899, and for over the past 125 years we have proudly supported local governments, municipalities, water departments, and businesses across the United States, and the world.
What We Offer:
<ul>
<li>Team Collaboration: Join a team-oriented environment where collaboration is not just a buzzword but a priority.</li>
<li>Career Growth: Be part of an industry leader renowned for world-class design, manufacturing, sourcing, and distribution, and take your career to the next level.</li>
<li>Comprehensive Benefits: We provide a comprehensive benefits package with options tailored to meet your needs and those of your family.</li>
</ul>
About the Role:
U.S. Pipe and Foundry is seeking talent to join our Engineering Team as a Metallurgist. This position provides technical guidance to Operations in the areas of melting, casting and heat treatment for the production and processing of ductile iron pipe. The candidate must be able to relocate to Birmingham, Alabama.
Specific Responsibilities:
<ul>
<li>Involved in all phases of the iron melting, processing, holding and casting operations. </li>
<li>Providing input on Alloy selection, raw material inspection, storage and usage, Refractory selection, application and use.</li>
<li>Delivering iron having close temperature and chemical composition tolerances done at or below budgeted cost.</li>
<li>Chemical analyses techniques and determining the proper metallic mix for melting and proper alloy additions. </li>
<li>On all phases of the casting process including mold condition, machine condition, machine set-up, alloy additions and pipe handling.</li>
<li>On all phases of the annealing process including temperature control, oven variables, and oven condition.</li>
<li>Reviewing operating reports, evaluating cost data, the type and quantity of pipe produced, defectives, etc., to determine corrective actions needed.</li>
<li>Works closely with Operations personnel to discuss problems and recommends solutions.</li>
<li>Take corrective actions as required.</li>
<li>Evaluates new alloys and materials; develops new processes and procedures as well as training on their use.</li>
<li>Recommends and explains benefits of new technology to plant management for evaluation.</li>
<li>Assists in Training on the Technical aspects of the processes in use.</li>
<li>Performs other related duties as required.</li>
</ul>
Skills and Qualifications:
<ul>
<li>College graduate with a degree in Metallurgical Engineering or Materials Science or five to seven years’ experience in the application of this knowledge to activities, such as supervision, safety, technical know-how and labor relations. </li>
<li>Familiarity with coreless and channel electric melting processes. </li>
<li>Experience in interpreting the metallography of the iron to determine compliance to process parameters and changes required, assess the quality of welds, and other issues that may arise.</li>
<li>Possesses the ability to train the metallurgical aspects of the operations.</li>
<li>The equivalent knowledge and training in order to provide a working knowledge of the regulations, practices, specifications and procedures concerned with the operations of the Company. </li>
<li>Must have the ability to communicate with others in this technology. </li>
<li>Must understand cost data, specifically related to the melting operation and in general to the plants as a whole. </li>
</ul>
Scope Data/Working Conditions/Physical Demands:
<ul>
<li>The employee will be working in an office environment but will be walking through the plant on a regular basis exposing the employee to foundry operations. </li>
<li>The employee will be exposed to the following working conditions: extreme heat and cold, noise, vibration, oils, and atmospheric conditions such as dust, fumes, and metallic particles.</li>
<li>The employee will be required to perform the following actions regularly: standing, walking, balancing, stooping, kneeling, reaching, talking, seeing, hearing and sitting. The majority of the actions will be standing and walking.</li>
</ul>

Metallurgist

<h3>Job Description</h3>
Job Description
The Tree Production Department shifts plants from one container size to a larger container size as the plant grows.
Essential Functions:
• Utilizes and maintains the PPE provided, care and clean company equipment used.
• Good knowledge of plant identification and quality.
• Follows proper planting techniques that involve pruning roots, proper depth placement, and proper irrigation.
• Assist in stocking trees after shifting.
• General care for the nursery grounds, keeping the nursery clean, organized, and safe for employees, customers, and vendors.
• General care for nursery stock (plants), ensures plants are watered, handled with care, and are placed in the appropriate location.
Additional tasks:
• May assist in other nursery departments as needed.
• Duties are subject to change at any time per management’s discretion.
Job Specifications:
Constantly works in outdoor weather conditions on uneven ground surfaces and rainy weather. Must be able to remain in a stationary position (standing/sitting). Extensive walking. Stooping, kneeling, and crouching required. Bending at the waist, twisting, turning, and squatting is required.
Lifting requirements: Up to 50 lbs. 75 percent of the time. Up to 100 lbs. 25 percent of the time (team lift techniques when required).
Hand movement: Gross grasping for moving plant material. Use of hands/fingers.
 M-F 7:00am-4:30pm

Tree Production I

<h3>Job Description</h3>
Job DescriptionCompany Description 
Who is Senior plc?
Senior plc is an international, market-leading, engineering solutions provider with 26 operating businesses in 12 countries. Senior designs, manufactures and markets high-technology components and systems for the principal original equipment producers in the worldwide aerospace, defense, and land vehicle and power &amp; energy markets. The Group is split into two divisions, Aerospace and Flexonics, servicing five key sectors.
Our global values underpin what we do, and how we do it …
Safety – Integrity – Customer Focus – Respect &amp; Trust – Accountability – Excellence
Who is Senior Aerospace Spencer?
Senior Aerospace Spencer is an engineer-driven organization focused on high-pressure hydraulic fluid fittings for use in commercial and military aerospace applications. We specialize in source-controlled, standard, and proprietary fittings. Senior Aerospace Spencer also identifies solutions for fluid conveyance challenges related to fitting applications. Our engineering capabilities include conceptual design assistance, modeling, testing and qualification. Our senior engineering professionals are active members of the SAE G3 Fluid Fitting committee and are recognized industry-wide for their expertise.
Job Description 
What does the job involve?
The CNC Programmer has responsibility for creating Computer-Numerical-Control programs (CNC) utilizing Computer-Aided-Manufacturing (CAM) software for manufacturing equipment (CNC Lathes 2X, CNC Mills 3X, CNC Multi Spindle Lathes 7X) in support of the Product Realization Process. Plans and executes CNC programming, tooling technology, and manufacturing strategies supporting the production of products within the company. Supports Manufacturing and Quality Department personnel related to CNC programs and production processes, within or outside the organization.
Essential Duties and Responsibilities:
Under general supervision, must be able to perform a variety of job duties including, but not limited to:
<ul>
<li>Plans, develops, maintains, and provides CNC programming support for manufacturing products utilizing CAM software (MasterCam and/or PartMaker) in accordance with product requirements, shop drawings, or instructions.</li>
<li>Develops, maintains, and provides CNC program geometries, CNC tool paths, fixturing, jaws, and 3D solid models in support of Manufacturing, CNC Programming, and Inspection functions.</li>
<li>Works closely with Planning, Manufacturing, and Quality to provide engineering technology and CNC support for products and manufacturing processes.</li>
<li>Plans, maintains and provides tooling technologies &amp; efficiencies, manufacturing strategies, and improvement opportunities in production.</li>
<li>Provides technology advancements, studies, and ideas to improve the manufacturing process, including lean manufacturing philosophies (i.e. removing waste, reducing costs, and improving throughput).</li>
<li>Develop and maintain standard work, work instructions, and written materials to support the control and standardization of CNC programming information in the manufacturing process.</li>
</ul>
Qualifications 
Education and/or Experience:
<ul>
<li>Desired Education; College degree, Vocational Certificate, or equivalent work experience in CNC/CAM programming of lathes and mills.</li>
<li>Qualifications: 3+ years minimum in a manufacturing environment utilizing CNC/CAM software.</li>
</ul>
Required Skills:
<ul>
<li>Strong organizational skills</li>
<li>Excellent communication skills</li>
<li>Problem solving skills</li>
<li>Prior experience in a rapid growth environment</li>
<li>Working knowledge of CNC programming with 3D solid models CNC/CAM/CAD (MasterCam, PartMaker, SolidWorks, or SpaceClaim, preferred).</li>
<li>Knowledge of Fanuc CNC programming language, standard G code programming.</li>
<li>Working knowledge and experience (“hands-on”) with CNC Lathes (2x, 2.5x), CNC Mills (3x), CNC Multi Spindle, Multi Turret Lathes 7x).</li>
<li>Ability to prioritize and multi-task, working in a team environment.</li>
<li>Good verbal and written communication skills, detail oriented, organization skills.</li>
<li>Experience in reading and interpreting engineering blueprints &amp; drawings.</li>
</ul>
Physical Requirements:
<ul>
<li>Standing/Walking: May need to stand or walk for extended periods, especially when monitoring or setting up machines on the production floor.</li>
<li>Sitting: Prolonged periods of sitting at a computer workstation for programming tasks and data entry.</li>
<li>Manual Dexterity: Use of hands and fingers to handle tools, operate touch screens, input devices, or make fine machine adjustments.</li>
<li>Lifting/Carrying: Occasionally lift or move items up to 25 pounds (e.g., machine parts, tools, materials).</li>
<li>Bending/Kneeling/Crouching: May be required when performing machine setups, troubleshooting, or maintenance checks.</li>
<li>Vision Requirements: Close vision, depth perception, and the ability to adjust focus to read screens, drawings, and precision instruments.</li>
<li>Hearing: Must be able to hear alarms, instructions, or machine sounds that indicate performance or malfunction.</li>
<li>Climbing: Occasionally climb stairs or ladders to access certain parts of the equipment or control panels (depending on machine size).</li>
<li>Environmental Tolerance: May work in environments with exposure to noise, vibration, dust, lubricants, and varying temperatures.</li>
</ul>
 Additional Information 
Working Pattern: 8:00am - 5:00 pm
Annual Rate: $60,000-90,000/yr.
 &nbsp;
Trade Compliance Statement Access to our facilities is restricted under the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR) to U.S. Persons (U.S. Citizens, lawful permanent residents, U.S. Nationals, U.S. refugees, asylees, or temporary residents under amnesty provisions ), and to properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes. Additionally, potential employee names will be screened against the Consolidated Screening List (maintained by the United States government) to determine eligibility to receive controlled technical data.
To ensure there is no unexpected delay to your start date with our Company and due to the potential need to obtain an export license, we would like to promptly assess whether such a license is needed to access our facility and/or systems. &nbsp;Such licenses can take several weeks/months to obtain from the U.S. Government. Our Trade Compliance department may reach out to you with a Licensing Assessment form, which we request you kindly complete and return as soon as possible.
Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. EOE M/F/D/V/VEVRAA Federal Contractor

CNC Programmer

<h3>Job Description</h3>
Job DescriptionContact Liza Rodriguez for quick phone screen or apply direct today!
Location: Sunnyvale, CA Work Environment: Onsite / In-person Pay Rate: $45.00 per hour Schedule: Full-time (30+ hours/week) Hours: Monday–Friday, 8:00 AM – 4:30 PM (OT possible)
🔧 About the Role
We’re partnering with an innovative client to find a Vehicle Build Technician to support their growing vehicle build and fleet expansion team. This is a hands-on, technical role where you’ll work closely with the NPI Manager to build, modify, test, and maintain next-generation FLEX vehicles.
If you enjoy working on cars, building/fixing computers, and solving mechanical or electrical challenges, this role offers an exciting opportunity in a fast-paced, cutting-edge environment.
🛠 What You’ll Do
As a Vehicle Build Technician, you will:
<ul>
<li>
Assemble, modify, test, and troubleshoot FLEX vehicles and related sub-assemblies
</li>
<li>
Fabricate and fit-check mounts, brackets, and electrical harnesses
</li>
<li>
Support installation, testing, and configuration of ADAS components (cameras, LIDAR, RADAR)
</li>
<li>
Provide hands-on troubleshooting and maintenance support for an active fleet
</li>
<li>
Travel within the U.S. and internationally as project needs arise
</li>
<li>
Help maintain an organized, clean, and efficient shop environment
</li>
<li>
Assist with inventory management and parts tracking
</li>
</ul>
✅ What We’re Looking For
The ideal candidate is great at fixing cars and building/fixing computers.
Required Skills &amp; Experience:
<ul>
<li>
Strong experience assembling and testing electromechanical components
</li>
<li>
Electrical harness fabrication skills, including soldering and cable termination
</li>
<li>
Metal fabrication experience (sheet metal work, drilling, cutting, rivet nuts, 80/20 frame assembly)
</li>
<li>
Mechanical aptitude and comfort working with tools and technical systems
</li>
<li>
Familiarity with Windows and Linux systems (basic troubleshooting is a plus)
</li>
<li>
Willingness and ability to travel as needed
</li>
</ul>
&amp;#x1F31F; Why You’ll Love This Role
<ul>
<li>
Excellent&nbsp;benefits
</li>
<li>
Supportive manager and collaborative team
</li>
<li>
Work on innovative vehicle technology
</li>
<li>
Competitive hourly pay with overtime opportunities
</li>
<li>
Stable Monday–Friday schedule
</li>
</ul>
📍 Work Details
<ul>
<li>
Onsite daily: Monday–Friday
</li>
<li>
No remote work
</li>
<li>
Based in Sunnyvale, CA &nbsp;
</li>
</ul>
Powered by JazzHR
7BXawF2d5f

19,765 Manufacturing Jobs