field_job_occupational_field_parents_all

field_job_employment_type

job_organization_name

city

state

<h3>Job Description</h3>
Job Description
Company Overview:
MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification.
We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. 
We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation.
Position Overview:
The Instrumentation Technician is responsible for installing, repairing, calibrating, and maintaining all instrumentation equipment with demonstrated proficiency with electrical test equipment including voltmeter, ammeter, HART handheld, etc. Instrumentation must have the ability to troubleshoot and repair a wide range of instrumentation including pH probes, level transmitters, pressure transmitters, flow meters, and related equipment. They will work independently and with other plant personnel to perform preventive, predictive, and routine maintenance tasks. All tasks will be performed while supporting the policies, goals, and objectives of the company.
Position Responsibilities:
<ul>
<li>Perform examinations of work areas and monitor compliance with MSHA regulations and company policies.</li>
<li>Install and wire instrumentation such as pH probes, level transmitters, flow meters, and other instruments.</li>
<li>Diagnose, isolate, and repair low voltage electrical, electronic, and instrumentation malfunctions to include the replacement and adjustment of components, integral units, motors, controls, standard devices.</li>
<li>Troubleshoot repair and maintain low voltage (0 VAC/VDC – 51 VAC/VDC).</li>
<li>Troubleshoot, repair, and PM/calibration of a wide range of instrumentation (temp, flow, proximity, pressure, valves, gas sensors, pH, etc.).</li>
</ul>
Basic Qualifications:
<ul>
<li>Associate degree or other certification as an Instrumentation Technician or equivalent.</li>
<li>3+ years of experience in a chemical plant, heavy industrial or mine.</li>
<li>Experience with DCS and PLC control systems.</li>
<li>Experience with reliability-based maintenance.</li>
</ul>
Desired Qualities:
<ul>
<li>Ability to troubleshoot PLC programs, simulate signals, calibrate instruments.</li>
<li>Ability to work in teams with strong collaboration skills.</li>
<li>Good verbal and written skills.</li>
<li>Attention to detail and ability to learn new duties.</li>
<li>Ability to complete a task with minimal supervision.</li>
<li>A Valid Driver’s License required to drive company vehicles on and off property.</li>
</ul>
MP Materials is Proud to be an Equal Opportunity / Affirmative Action Employer
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation.
Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire.
For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.
Safety Provision - Employees are responsible for following all company, industry and regulatory procedures and laws to ensure a safe work environment for themselves and the company. Employees must have a willingness to promote safety among the workforce, participate in Process Hazard Analysis procedures and Pre-Startup Safety Reviews.
(PPE) Personal Protective Equipment is required when performing work in a mine, manufacturing, outdoor, or plant environment. Required PPE may include, but is not limited to, hard hat, hearing protection, safety glasses, safety footwear, respirator, rubber steel-toe boots, protective clothing, gloves, and any other protective equipment as required.
Working Conditions - Our facility sits at an elevation of 4,700 feet. Employees may be subject to extreme weather conditions when working in an outdoor setting (heat and cold, wind). Work is at an open pit mine or manufacturing/chemical plant setting, which may include exposure to moving mechanical parts, toxic chemicals, risk of electrical shock, explosives, fumes, or airborne particles.
Physical Demands -Manual dexterity; sense of touch; sense of smell; speaking clearly; hearing-speech range; hearing – all ranges; seeing, reading and comprehensions; seeing – distant/near; depth perception; color vision. While performing the job responsibilities, the employee is required to talk and hear. The employee is often required to stand and use their hands and fingers, to handle or feel and to manipulate laboratory equipment. The employee is occasionally required to walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl. Vision abilities required by this job include close vision. Employees must pass a full-face respiratory fit test. Employees must be able to lift 50 lbs. Must be able to work in PPE level C. These requirements are representative, but not all-inclusive, of the knowledge, skill, and ability required of the employee.

Instrumentation Technician

<h3>Job Description</h3>
Job DescriptionnEye.ai, a well-funded optical switch startup, is poised to revolutionize the future of data centers. nEye’s MEMS-based silicon photonics optical circuit switches (OCS) eliminate critical bottlenecks in AI processing by enabling direct optical connections among thousands of GPUs and memory units. The company's SuperSwitch is an ultra-low power consumption, high radix, compact chip-scale design, offering hyperscale data centers enhanced performance, efficiency, and scalability. Job Overview: We are seeking a highly experienced and proactive Process/MEMS Engineer to be a key player in defining and improving our Si photonics MEMS technology, which is at the heart of our optical switches. You will be an active participant in our regular company process meetings and help frame our wafer fabrication technologies and strategies. You will be successful if you thrive in a fast-paced environment, can participate in multiple work streams simultaneously, and are passionate about solving problems and learning. The position is based in Berkeley/Emeryville and includes working in both our Emeryville location and in the Marvell Nanofabrication Laboratory on the UC Berkeley campus.Key Responsibilities
<ul>
<li>Wafer Design and Fabrication Methodologies: (1) Collaborating with other team members to understand chip design and product system level requirements and translate those learnings into specific device designs and fabrication methodologies. (2) Developing and improving fabrication methodologies and exploring appropriate materials to advance our optical switch technology. (3) Partnering with external vendors and technology providers to develop fabrication methods and procedures.</li>
<li>Wafer Processing: (1) Running wafers through our lab and performing critical analysis on process steps. (2) Designing and implementing process short loops. (3) Advise and assist other wafer fab team members to collaboratively identify and solve fabrication-related issues.</li>
</ul>
Minimum Qualifications
<ul>
<li>Master's or PhD degree in Electrical Engineering, Materials Science, Applied Physics, Chemistry, or a related technical discipline.</li>
<li>Experience with Si photonics or MEMS technologies.</li>
<li>3+ years hands-on experience with microfabrication methods and techniques.</li>
<li>Experience with failure analysis, metrology, and process development.</li>
<li>Experience with mask design, thin film deposition and characterization, and wet/dry etching.</li>
<li>Experience with developing and scaling processes from inception to prototyping and production.</li>
</ul>
Preferred Skills
<ul>
<li>Experience with MEMS design and layout tools and simulation tools, e.g., COMSOL, Ansys, Klayout and Coventor.</li>
<li>Experience designing and executing detailed experimental protocols.</li>
<li>Excellent interpersonal communication (written and oral), and leadership skills.</li>
</ul>
Benefits &amp; Perks
<ul>
<li>Opportunity to join a small well-funded start-up company, doing pioneering work in optical switches.</li>
<li>Competitive salary and equity package, including early-stage company stock option</li>
<li>401k</li>
<li>Full healthcare coverage: medical, dental, and vision</li>
<li>Fitness center access</li>
</ul>
Starting salary and title will depend on, and be commensurate with, relevant industry experience, skills, training, education, market demands, and the ultimate job duties and requirements.nEye is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.
We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Process/MEMS Engineer

<h3>Job Description</h3>
Job Description
Join a Global Leader in Innovation – Drive Manufacturing Excellence as a Machine Operator. Location: Huntington Beach, CA Shift: 12-Hour Shifts – 4:00 AM - 4:30 PM or 8:00 AM - 8:30 PM Project Duration until the end of January 2026. Monday - Thursday Pay Rate $21.00/hr
Position: Machine Operator
Openings available for both shifts
Job Duties:
<ul>
<li>
Execute job startup and shutdown procedures.
</li>
<li>
Monitor and operate production extrusion lines.
</li>
<li>
Prepare and measure color mixes and additives.
</li>
<li>
Perform material changeovers and machine clean-ups efficiently.
</li>
<li>
Record production data accurately.
</li>
<li>
Package finished materials.
</li>
<li>
Maintain a clean and organized workspace.
</li>
<li>
Adhere to all safety guidelines and regulations.
</li>
</ul>
Required Skills:
<ul>
<li>
Strong communication skills.
</li>
<li>
Basic knowledge of running extruder or mixing equipment.
</li>
<li>
Ability to learn pre- and post-production equipment and operations (drying, bagging, grinding, etc.).
</li>
<li>
General mechanical knowledge and troubleshooting skills.
</li>
</ul>
Interested? Please contact our Irvine office immediately at (949) 855-0300.
 PandoLogic. Keywords: General Machine Operator, Location: Huntington Beach, CA - 92605 , PL: 601958533

Machine Operator

<h3>Job Description</h3>
Job Description
Job Title: Machine Operator ($22 -$23/hour)
Job Description
We are seeking a skilled Machine Operator to join our team and work with high-quality aerospace parts. The ideal candidate will operate a drill press machine, ensuring precision and quality in every task.
Responsibilities
<ul>
<li>Operate drill press machine efficiently and safely.</li>
<li>Load parts into the machine using a wrench and initiate the machine operation by pressing the button.</li>
<li>Conduct minor inspections using calipers to ensure parts meet quality standards.</li>
</ul>
Essential Skills
<ul>
<li>Proficiency in machine operation, particularly with drill presses.</li>
<li>Experience with inspection tools such as calipers.</li>
<li>Ability to use hand tools, including wrenches.</li>
</ul>
Additional Skills &amp; Qualifications
<ul>
<li>Familiarity with aerospace parts and blueprint reading is a plus.</li>
</ul>
Why Work Here?
Enjoy a dynamic work environment with a steady flow of projects due to a backlog of orders. This ensures job stability and a busy schedule well into the next year.
Work Environment
Work in a small machine aerospace shop specializing in hinges for aircraft doors. The environment is focused on precision and quality, typical of the aerospace industry.
Job Type &amp; Location
This is a Contract to Hire position based out of Commerce, CA.
Pay and Benefits
The pay range for this position is $21.00 - $23.00/hr.
Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)
Workplace Type
This is a fully onsite position in Commerce,CA.
Application Deadline
This position is anticipated to close on Dec 30, 2025.
About Aerotek:
We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. 
<h3>Company Description</h3>
We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

<h3>Job Description</h3>
Job Description
Inspector III, Machine Shop Location: Sylmar, CA Job #: 71858 Duration: 6 months (possibly longer) Pay Rate: $Depend on Experience/hr W2 Summary: Provides support to the Quality Inspection Department/Fabrication and performs routine to advanced clerical, filing, and inspection duties. This person will assist with the day-to-day inspection tasks and additional engineering requests where necessary. Will assist with the training of lower-level personnel to increase the knowledge base across the department. Additional inspection requirements may be added to assist additional departments. Primary Responsibilities
<ul>
<li>Inspects complex manufactured parts for conformance to print and specification requirements.</li>
<li>Performs visual, dimensional, mechanical, and optical inspections per instructions.</li>
<li>Uses basic to complex inspection measurement equipment including CMM, microscopes, optical comparators, and coordinate measurement equipment to set up and verify dimensions and geometric tolerances for compliance.</li>
<li>Works from engineering drawings, internal and external specifications, quality assurance standards, test procedures, and verbal instructions to determine acceptance of product.</li>
<li>Participates in continuous improvement teams.</li>
<li>Assist in supporting customer onsite audits.</li>
<li>Maintain the highest ethical and quality standards, even when challenged from above.</li>
<li>Uses computers to document quality records, first article and dimensional reports, and job status, including the scanning and filing of records." for subject-verb agreement..</li>
<li>May assist with lean initiatives and participate where required.</li>
</ul>
 Qualifications/Experience
<ul>
<li>Requires a minimum of five years of mechanical inspection experience.</li>
<li>Two year technical degree or Certified Mechanical Inspector (CMI) preferred.</li>
<li>Certified Green Belt (CSSGB) or Quality Inspector (CQI) a plus.</li>
<li>Excellent communication skills.</li>
<li>Attention to detail and very organized.</li>
<li>Proficiency in Microsoft Office Applications or equivalent.</li>
<li>Must be able to communicate and understand instructions in English.</li>
<li>Ability to work effectively and independently with minimal instruction.</li>
<li>Knowledge of shop mathematics, blue print reading, geometric tolerances, and SPC.</li>
<li>Demonstrated ability to use basic and advanced inspection measuring equipment.</li>
<li>Ability to use all types of inspection tools and equipment.</li>
</ul>
 Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at #ZR

Inspector III, Machine Shop

<h3>Job Description</h3>
Job Description
We are seeking a QC Associate to join our team! You will conduct tests to determine the quality of materials and finished products as well as identify areas of improvement to increase efficiency.&nbsp;
Responsibilities:
<ul>
<li>Perform thorough examinations of all materials and finished products</li>
<li>Conduct and report internal audits and evaluations&nbsp;</li>
<li>Implement and improve quality control operating procedures</li>
<li>Identify and troubleshoot equipment problems and defects</li>
<li>Participate in routine visual inspections</li>
<li>Maintain a clean and safe work environment</li>
</ul>
​​Qualifications:
<ul>
<li>Previous work experience in quality control or other related fields</li>
<li>Strong attention to detail</li>
<li>Strong analytical and critical thinking skills</li>
<li>Excellent written and verbal communication skills</li>
</ul>
​To be considered, please click "Apply Now."

QC Associate

<h3>Job Description</h3>
Job Description
JSG is looking for a Sr. Quality Inspector / CMM - 2nd shift to work at one of our premier Aerospace Clients in Simi Valley, CA. MUST HAVE AEROSPACE&nbsp; &nbsp;
Brief Description
<ul>
<li>Uses fixed or variable measuring instruments to inspect parts, products, and/or processes and ensure conformance with established requirements and determination of compliance.</li>
<li>Checks for irregularities and defects.</li>
<li>Verifies specified dimensions on products or materials.</li>
<li>Works under minimal supervision.</li>
<li>May assist in orienting and training lower-level associates.</li>
</ul>
Job Requirements:
<ul>
<li>Ability to both read and interpret the requirements of drawings and plans.</li>
<li>Ability to use all inspection/test equipment, except coordinate measurement (CMM), required determining product acceptance.</li>
<li>Ability to construct simple inspection set-up(s) and perform required inspections (using set-up) to determine product acceptance</li>
<li>Ability to initiate and complete all quality (Inspection) related records and documents with minimal supervision.</li>
</ul>
 #D800 ** Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law
Company DescriptionOur people and culture make JSG a great place to work. JSG’s mission is to empower people, help our clients reach their goals, and hire motivated individuals. Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. We are always looking for great people to join our team—we want to see your success here at JSG! We can be found locally in more than 30 offices throughout the United States and Canada. JSG continues to work diligently to offer our clients and candidates world-class service and diversified offerings to fit their evolving needs. We offer medical, dental, vision, life insurance options, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. 
<h3>Company Description</h3>
Our people and culture make JSG a great place to work. JSG’s mission is to empower people, help our clients reach their goals, and hire motivated individuals.\r\n\r\nJohnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. We are always looking for great people to join our team—we want to see your success here at JSG! We can be found locally in more than 30 offices throughout the United States and Canada. JSG continues to work diligently to offer our clients and candidates world-class service and diversified offerings to fit their evolving needs.\r\n\r\nWe offer medical, dental, vision, life insurance options, 401(k), weekly pay, and more.\r\n\r\nJohnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

Quality Inspector

<h3>Job Description</h3>
Job Description
Purpose&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Responsible for maintaining quality standards by approving incoming materials, in-process production, and finished products; recording quality results.
Essential functions:&nbsp; 
<ul>
<li>Approves incoming materials by confirming specifications; conducting visual and measurement tests; rejecting and returning unacceptable materials</li>
<li>Approves in-process production by confirming specifications; conducting visual and measurement tests; communicating required adjustments to production supervisor</li>
<li>Approves finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work</li>
<li>Documents inspection results by completing reports and logs; summarizing re-work and waste; inputting data into quality database</li>
<li>Keeps measurement equipment operating by following operating instructions; calling for repairs</li>
<li>Maintains safe and healthy work environment by following standards and procedures; complying with legal regulations</li>
<li>Updates job knowledge by participating in educational opportunities; reading technical publications</li>
<li>Accomplishes quality and organization mission by completing related results as needed</li>
</ul>
Minimum qualifications:&nbsp;
<ul>
<li>Familiar with PME utilized in machined part inspection, Analyzing Information, Reporting Research Results, Documentation Skills, Promoting Process Improvement, Safety Management, Manufacturing</li>
<li>Methods and Procedures, Supports Innovation</li>
<li>Must have good English written and verbal communication skills</li>
<li>Have good arithmetic skills</li>
<li>Have mechanical aptitude</li>
<li>Must have knowledge of precision measurement instruments</li>
<li>Be proficient in Microsoft Excel and Microsoft Word</li>
<li>Must be attention to details</li>
<li>Ability to work in a team environment</li>
</ul>
Experience/Education:&nbsp;
<ul>
<li>2+ years’ experience in aerospace manufacturing/machine shop required</li>
<li>ISO 9001-2008 and AS-9100 experience preferred</li>
<li>CMM experience preferred</li>
<li>High school diploma or equivalent</li>
</ul>
Working conditions: &nbsp;
<ul>
<li>While performing the duties of this job, the employee is regularly required to use hands and arms to perform repetitive motions; to sit, stand, bend, reach, talk, hear and move around the facility</li>
<li>Must have close visual acuity to perform daily duties such as:&nbsp; visual inspection involving small defects, small parts and/or operation of machines (including inspection); using measurement devices</li>
<li>Must be able to lift up to 50lbs if required</li>
<li>Required to work on concrete floors, wearing steel toe shoes and safety goggles</li>
<li>4/10&nbsp;scheduled. May work over-time if scheduled.</li>
<li>Worker is subject to noise, hazards, atmospheric conditions, oils</li>
<li>May be required to wear a respirator</li>
</ul>
Success factors:&nbsp; Consistent personality, dependable nature, attention to detail and willingness to learn and train others are absolutely necessary.
Company DescriptionEstablished in 2007, IPanel Systems Inc. is now moved to Valencia, California. We specialize in manufacturing machined parts and customized avionics display components including simulated products for both military and commercial applications. Our in-house capabilities (CNC Machining, Painting, Laser Markings, Light Balancing...etc) allow us to cost-effectively build these products in short turn-around time without compromising the quality or customers expectations. Our website: <a href="https://ipanel-systems.com/" target="_blank">https://ipanel-systems.com/</a> 
<h3>Company Description</h3>
Established in 2007, IPanel Systems Inc. is now moved to Valencia, California. We specialize in manufacturing machined parts and customized avionics display components including simulated products for both military and commercial applications. Our in-house capabilities (CNC Machining, Painting, Laser Markings, Light Balancing...etc) allow us to cost-effectively build these products in short turn-around time without compromising the quality or customers expectations.\r\n\r\nOur website: <a href="https://ipanel-systems.com/" target="_blank">https://ipanel-systems.com/</a>

Quality Control Inspector

<h3>Job Description</h3>
Job Description
<ul>
<li>Non-Destructive Test Technician Level 2&nbsp;Magnetic
<ul>
<li>Magnetic Method</li>
<li>We require proof of on the job hours</li>
<li>We require proof of certifications</li>
<li>NDT, NDE, NDI are other titles that can be used to search candidates</li>
<li>1st&nbsp;shift : 6am – 2:30pm with OT 1-2 HRS</li>
<li>Direct or Temp to hire depending on interview</li>
<li>$25.00-$33.00 is the range however, they would need to have lots of experience for $33/hr.</li>
</ul>
</li>
</ul>
JD -&nbsp;POSITION SUMMARY:
The primary responsibility of the Certified Non-Destruct Test Technician Level 2 is to test and inspect parts and assemblies for defects using automated and manual methods and techniques, including radiography, ultrasound, penetrant, eddy current, and laser shearography and magnetic particle.
ESSENTIAL DUTIES &amp; RESPONSIBILITIES:
<ul>
<li>Adherence to safety procedures/guidelines at all times.</li>
<li>Maintain safety precautions at all times.</li>
<li>Keep the work area in a clean and orderly condition.</li>
<li>Perform specific inspections and specific evaluations for acceptance or rejection determinations according to written instructions and to record results.</li>
<li>Perform NDT Examinations in conjunction with receipt and in-process inspections on material purchased for use in fabrication.</li>
<li>Familiar with the tools and equipment, and shall have demonstrated proficiency</li>
<li>in their use.</li>
<li>Capable of determining the calibration status of inspection and measuring equipment is in proper condition for use, and that inspection, examination and test procedures are approved.</li>
<li>Capable of assisting production in the set-up of material and/or components for receipt inspection, as required.</li>
<li>Train other individuals as required by management</li>
</ul>
MINIMUM AND PREFERRED QUALIFICATIONS:
<ul>
<li>Must be qualified to be certified as a Level 2 to NAS 410 in one or more of the following NDT Methods that will be utilized:</li>
<li>Fluorescent Penetrant Inspection (FPI).</li>
<li>Magnetic Particle Inspection (MPI).</li>
<li>Certifications MUST be current.</li>
<li>Ability to communicate, read, and understand English.</li>
<li>Ability to read blueprints/drawings</li>
<li>Ability to follow precise instructions.</li>
<li>Ability to work around hazardous chemicals.</li>
<li>Must have excellent hand/eye coordination.</li>
<li>Ability to work well with others as part of a team.</li>
<li>Able to multi-task and open to working overtime.</li>
</ul>

NDT Technician

<h3>Job Description</h3>
Job Description
Job description:
This position is Temp to Hire. The selected candidate will be employed by the company through an employment agency.
Work Days - Mon through Thursdays (32 hours)
Shift : 2nd Shift (2pm - 10:30pm)
DESCRIPTION
Quality Inspector is responsible for inspecting, testing, measuring, reviewing final product during manufacturing to make sure the quality standards are meet. This position directly reports Quality Assurance Manager.
Duties &amp; Responsibilities:
<ul>
<li>Read blueprints and specifications to understand the requirements of product.</li>
<li>Basic knowledge of Keyence Equipment for measurement.</li>
<li>Responsible for visually inspecting the final product &amp; rework every hour.</li>
<li>Measure final products critical dimension every 2 hourly and recording the dimensions in log.</li>
<li>Responsible for all start up and retains during the shift.</li>
<li>Responsible for all equipment’s &amp; documents used during the manufacturing shifts.</li>
<li>Responsible for data record, statistical analysis, and reports.</li>
<li>Responsible for making shift report, informing about all job runs and problems during the shift.</li>
<li>Knowledge and able to perform first article report to blueprint and customer requirement.</li>
<li>Reject final product that do not meet customer requirement and inform shift supervisor.</li>
<li>Recommend improvements to the production process to ensure quality control.</li>
<li>Resolve quality -related issues in a timely manner.</li>
<li>Responsible for all start up samples to be hand in the library.</li>
<li>Responsible to retain sample properly</li>
<li>Perform any other assignments given by Quality Assurance Manager.</li>
</ul>
Required Knowledge, Skills, &amp; Abilities:
<ul>
<li>High school diploma or equivalent qualification.</li>
<li>Able to work with minimum supervision</li>
<li>knowledge of keyance programming</li>
<li>A minimum of 2 years’ experience in a similar role (Preferred).</li>
<li>Strong understanding of quality control standards and testing techniques.</li>
<li>Knowledge and understand complex blueprint.</li>
<li>IQMS, CMM, &amp; RAM (Preferred)</li>
<li>Certification of quality control is a strong advantage.</li>
<li>AQI tables,</li>
<li>Knowledge on validation of tools (OQ, PQ)</li>
</ul>
Job Types: Full-time, Temp-to-hire
Schedule:
<ul>
<li>8 hour shift</li>
<li>Day shift</li>
</ul>
Shift availability:
<ul>
<li>Day Shift (Preferred)</li>
</ul>
Ability to Commute:
<ul>
<li>Pomona, CA 91768 (Required)</li>
</ul>
Ability to Relocate:
<ul>
<li>Pomona, CA 91768: Relocate before starting work (Required)</li>
</ul>
Work Location: In person
Job Type: Temp-to-hire
Work Location: In person
Company DescriptionFounded in 1981, PEP has been an industry leader in custom plastic injection molding in the Greater Los Angeles area for over 40 years. With extensive experience in manufacturing high-quality custom plastic parts, the team at PEP remains dedicated to providing superior customer service and establishing long-lasting client relationships built on trust and integrity. 
<h3>Company Description</h3>
Founded in 1981, PEP has been an industry leader in custom plastic injection molding in the Greater Los Angeles area for over 40 years. With extensive experience in manufacturing high-quality custom plastic parts, the team at PEP remains dedicated to providing superior customer service and establishing long-lasting client relationships built on trust and integrity.

20,676 Manufacturing Jobs