field_job_occupational_field_parents_all

field_job_employment_type

job_organization_name

city

state

<h3>Job Description</h3>
Job Description
Position Overview and Description:
This position is bond-eligible and is strictly limited to work associated with capital construction, modernization, and sustainability projects as defined under the BuildLACCD Bond Program. Duties performed under this position shall not include routine maintenance, repair, or operational tasks that fall within the responsibilities of facilities Maintenance &amp; Operations (M&amp;O). The scope of this role is exclusively tied to bond-eligible activities such as planning, design, construction, commissioning, and related project management functions necessary to deliver capital improvements consistent with LACCD’s Capital Construction Bond Program requirements and legal limitations governing bond fund expenditures.
 
• Lead and manage sustainability projects in accordance with District and program policies and procedures for College construction bond operations.
• Implement the electrification of central plants and other building systems outlined in the Board of
Trustees’ Clean Energy Resolution passed in July 9, 2020.
• Apply knowledge of Sustainable Building Principles and Standards to assist with complex systems level issues.
• Support districtwide energy master planning, carbon reduction, grid resiliency, and electrification initiatives.
• Apply knowledge of energy and environmental sustainability approaches, such as LEED credits, and its related impacts to operational efficiency.
• Understand Title 24 and ASHRAE recommendations.
• Coordinate with multi-disciplinary teams in conjunction with Project Managers, to meet project requirements and timelines.
• Assist College Project Teams (CPT’s) with technical issues that require second opinions i.e. peer review of Request For Clarifications (RFC’s), Change Orders, etc.
• Travelling to and from project sites upon request of attending project and construction meetings.
• Involvement in all parts of the project life cycle, to include master planning, design, construction, and closeout.
• Perform electrical engineering analysis and technical reports supporting District design guidelines.
• Ensure integration of LED lighting systems, PV, BESS, EV charging, microgrids, and smart controls.
• Perform other related duties as assigned by the PMO and LACCD.
 
Minimum Required Qualifications:
• Bachelor’s Degree in in Electrical Engineering
• 10 or more years of professional electrical engineering experience in design, construction, or facilities infrastructure projects.
• Strong knowledge of California Energy Codes, Title 24 Energy Code, National Electrical Code (NEC), California Code of Regulations Part 11 (Cal Green Code) and applicable electrical engineering standards.
 
Preferred Qualifications:
• 2 years’ experience in Educational Facility Construction
• Experience and/or certification in Leadership in Energy and Environmental Design (LEED) certified projects and/or the Collaborative for High Performing Schools (CHPS)
• California Professional Engineering (PE) license in Electrical Engineering
Company DescriptionYang Management, Inc., a full service Construction and Project Management firm, is currently seeking various positions for projects in Southern California. Ideal applicants will have advanced knowledge and experience within the construction industry and past success on both vertical and transit projects. 
<h3>Company Description</h3>
Yang Management, Inc., a full service Construction and Project Management firm, is currently seeking various positions for projects in Southern California. Ideal applicants will have advanced knowledge and experience within the construction industry and past success on both vertical and transit projects.

Senior Electrical Engineer

<h3>Job Description</h3>
Job DescriptionDescription:
Superior Electrical, Mechanical, and Plumbing, Inc. is a statewide provider of commercial skilled trade services. We are seeking an experienced Generator Technician to join our Southern California division. Work schedules are Tuesday through Saturday or Sunday through Thursday, with occasional travel shifts. The position includes a two-week training schedule and annual performance reviews. Technicians are issued company vehicles and may start their service routes from their home address or designated location. The ideal candidate will have a minimum of eight years of recent experience performing generator preventive maintenance and repairs, along with strong commercial electrical knowledge related to stationary generators and their optimal performance.
 
Responsibilities
<ul>
<li>Visually inspect and diagnose issues with natural gas and/or gasoline-powered standby commercial generators</li>
<li>Perform routine maintenance tasks, including oil changes, filter replacements, battery replacements, and servicing of belts, spark plugs, and other mechanical components</li>
<li>Demonstrate knowledge and experience with CAT, Cummins, Generac, Kohler, or Detroit Diesel generator systems</li>
<li>Demonstrate working knowledge of both DC and AC voltage systems</li>
<li>Troubleshoot and service Automatic Transfer Switches (ATS) with proficiency</li>
<li>Conduct load bank testing to ensure generator performance under load</li>
<li>Educate end users on proper generator operation and basic maintenance procedures</li>
<li>Provide service and repair recommendations to maintain equipment in optimal working condition</li>
<li>Read and interpret technical manuals, schematics, and wiring diagrams</li>
<li>Operate a company vehicle and complete fleet maintenance reports as required</li>
<li>Maintain accurate records of all inspections, maintenance, and repair work performed</li>
<li>Communicate effectively with management, team members, and clients to ensure clear understanding of service needs and solutions</li>
</ul>
Requirements:
<ul>
<li>Minimum of eight years of recent experience performing commercial generator maintenance</li>
<li>Basic understanding of NFPA 70E, OSHA regulations, and general electrical safety practices</li>
<li>Ability to pass a pre-employment drug test and motor vehicle background check</li>
<li>Proficient English communication skills, both written and verbal, for preparing reports and emails</li>
<li>Must possess personal hand tools required to perform mechanical work and voltage testing</li>
<li>Willingness to commute to various job sites using company vehicles within Orange County, Los Angeles County, and/or the Inland Empire</li>
<li>Ability to work independently as well as collaboratively within a team environment</li>
<li>Superior Electrical, Mechanical &amp; Plumbing, Inc. is a service and construction company providing customer service throughout California and other states. We offer competitive wages, medical coverage, 401(k) employee contributions, supplemental insurance options, sick leave, vacation time and skilled trade development</li>
</ul>

Commercial Generator Mechanic

<h3>Job Description</h3>
Job Description
Job Summary The Quality Engineer is part of an internal Integrated Product Team (IPT) of manufacturing, engineering, Program Management, and support staff (Maintenance, Purchasing, etc.). &nbsp;The Quality Engineer participates in all areas of client’s Quality Management System QMS) and provides systems support for the various quality functions including contract and purchase order review, interpretation of contractual quality requirements and plans for compliance, data collection and analysis, and preparation of quality management system documentation. The &nbsp;Quality Engineer designs and manages process improvement projects as team leader and facilitator, and they support client's continual improvement efforts including ISO 9001:2008, internal audits Lean Six Sigma, and Statistical Process Control (SPC). Primary Responsibilities
<ul>
<li>Customer point of contact for all quality topics for assigned programs. Maintain excellent customer relations.</li>
<li>Manages and supervises direct report quality inspectors for assigned programs.</li>
<li>Applies systematic problem solving and improvement concepts in a team environment to resolve product quality issues.</li>
<li>Prepares test plans for conducting experimental trials and qualification of tooling to support improvement efforts, including any required Management of Change (MOC) documentation, work instructions, maintenance work orders and subsequent Capital Expense Requests (CERs).</li>
<li>Analyzes cost of quality and performance data to plan and deploy improvement efforts.</li>
<li>Provide routine, accurate reports to senior management and program team members, as required.</li>
<li>Reads and understands customer requirements, product drawings and specifications and provide written interpretation for performance.</li>
<li>Understands, is able to generate, and oversees the timely completion of quality documentation required for the approval of production deliveries.</li>
<li>Participates in all areas of client's quality management system.</li>
<li>Provides input in areas not specific to quality assurance but essential to client’s Shared Values and team based management structure.</li>
<li>Maintains the highest ethical standards, even when challenged from above.</li>
<li>Understands and lives by client’s ethics and business conduct policies.</li>
</ul>
Education &amp; Professional Work Experience Requirements
<ul>
<li>Must be authorized to work in the U.S.</li>
<li>To conform to U.S. export control regulations, applicant should be eligible for any required authorization from the U.S. Government</li>
</ul>
Qualifications
<ul>
<li>Bachelor of Science degree, preferably in Engineering, Mathematics, Statistics, or Manufacturing.</li>
<li>One to five years experience in Quality Engineering or comparable work experience.</li>
<li>Knowledge of Government specifications, contracts, and ISO 9001:2008 requirements.</li>
<li>Knowledge of management systems for improving quality, i.e. benchmarking, project management, six-sigma, experimental design.</li>
<li>Knowledge of Lean Manufacturing tools and Statistical Process Control (SPC).</li>
<li>Must be dependable, responsible, and accurate and have the ability to deal with people effectively.</li>
</ul>
Competencies Leaders who demonstrate a positive outlook; sense of urgency, professionalism; cool under pressure; approachability, charismatic leadership, interpersonal savvy, motivational skills, conflict management, assessing people, organizing, planning, priority setting, building effective teams, managerial courage, fairness to direct reports and relentless drive for results. Work Hours &amp; Travel
<ul>
<li>4/10 workweek with some overtime on Fridays or weekends as necessary, to meet program objectives.</li>
<li>Some US travel may be required, normally a few multi-day trips per year.</li>
</ul>
Company DescriptionWe're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we’ve changed the lives of thousands of people for the better - people just like you. It’s our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer. 
<h3>Company Description</h3>
We're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we’ve changed the lives of thousands of people for the better - people just like you. It’s our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.

QUALITY ENGINEER - AEROSPACE

<h3>Job Description</h3>
Job Description
Tool &amp; Die Maker – Automotive &amp; Consumer Stamping ???? Location: Ontario CA | ???? $90k - $120k – Full Benefits – Great Company Culture
Join a leading metal stamping manufacturer serving the automotive, consumer goods, and medical device sectors. We're expanding and need seasoned Tool &amp; Die Makers to support new product launches and high-volume production.
???? Key Responsibilities:
<ul>
<li>Build, maintain, and repair progressive, transfer, and deep draw dies</li>
<li>Work closely with cross-functional teams on new launches and die qualifications</li>
<li>Troubleshoot and fix die issues in a fast-paced stamping environment</li>
<li>Assist in continuous improvement and lean manufacturing initiatives</li>
<li>Perform spotting, machining, and die set-up with expert precision</li>
<li>Collaborate with engineering and quality on part quality and tooling standards</li>
</ul>
✅ Qualifications:
<ul>
<li>5–7 years of experience in tool &amp; die making for high-volume stamping</li>
<li>Strong background in progressive and transfer dies, large press lines, and die repair</li>
<li>Ability to read blueprints, CAD, and GD&amp;T</li>
<li>Journeyman certification or equivalent experience</li>
<li>Knowledge of steels, coatings, and die materials</li>
<li>Excellent problem-solving and communication skills</li>
<li>Automotive stamping experience a big plus</li>
</ul>
???? Perks:
<ul>
<li>Reports to Tooling Manager</li>
<li>Upward mobility into leadership roles</li>
<li>Full benefits: Medical, Dental, Vision (start 1st of following month)</li>
<li>401k match, PTO, paid holidays</li>
<li>Relocation considered</li>
<li>Scenic area with beaches, boating, hiking &amp; more</li>
<li>Join a team of 20+ expert Tool Makers in a company that’s growing fast!</li>
</ul>
???? Send your resume to: <a href="mailto:resume@topdogengineers.com" target="_blank">resume@topdogengineers.com</a> ???? Call: Top Dog Engineers – 601.607.8217

Tool & Die Maker

<h3>Job Description</h3>
Job Description
Equipment Maintenance Technician III
3-month contract with potential to extend or convert
Pay Rate: $32-38/hour DOE
Location: San Jose, CA
Schedule: Monday–Friday, 8:00 AM–5:00 PM PST
 
 
Overview
We are seeking a highly skilled and reliable Equipment Technician to support operations in a clean-room environment.
 
The ideal candidate has strong mechanical and electro-mechanical proficiency, hands-on experience assembling tooling and testers, and a proven track record of reliability and longevity in previous roles.
 
 
Essential Duties and Responsibilities
<ul>
<li>Perform complex troubleshooting and root-cause analysis on down equipment efficiently and accurately.</li>
<li>Conduct both scheduled and unscheduled maintenance on equipment.</li>
<li>Recommend and implement solutions for recurring problems or equipment deficiencies.</li>
<li>Complete preventative maintenance activities in accordance with PM specifications and safety procedures.</li>
<li>Thoroughly and accurately document corrective actions, repairs, and maintenance performed.</li>
<li>Support assignments ranging from routine to highly complex, requiring sound judgment and analytical skills.</li>
<li>Assist with production tasks when needed.</li>
<li>Maintain continuous skill development through formal training and hands-on problem solving.</li>
<li>Clean-room experience is highly preferred.</li>
<li>Candidates should demonstrate consistent work history and reliability.</li>
</ul>
 
 
Required Skills
<ul>
<li>Strong understanding of mechanical, electro-mechanical, hardware, and software within a development technician environment</li>
<li>Ability to read and interpret mechanical drawings, wiring diagrams, and technical documentation</li>
<li>Ability to interpret operating, safety, and maintenance documents</li>
<li>Proficiency in English (reading, writing, speaking)</li>
<li>Technical understanding of Hard Disk Drives and their components</li>
<li>Strong written and verbal communication skills</li>
<li>Strong interpersonal abilities to build trust and rapport at all organizational levels</li>
<li>Self-motivated, able to manage multiple tasks, and comfortable working collaboratively in a team environment</li>
</ul>
 
 
Additional Qualifications
Required:
<ul>
<li>Minimum AA degree in Electronics, Computer Engineering, or equivalent combination of education and experience</li>
<li>OR Certificate from a vocational or trade school in computer technology, computer hardware/software maintenance, or equivalent experience</li>
<li>Minimum 6+ years of recent experience supporting and repairing assembly or test equipment</li>
<li>Advanced skills in Microsoft OS, Word, Excel, Outlook, and PowerPoint</li>
<li>Good manual dexterity for assembling, adjusting, or repairing fine mechanical or electronic parts and using basic hand tools</li>
</ul>
Preferred:
<ul>
<li>Previous experience with Hard Disk Drive clean-room tooling and test equipment</li>
<li>Electrical, mechanical, and software troubleshooting experience, with emphasis on software log analysis</li>
</ul>
 
Company DescriptionThe TPS Group, <a href="http://www.tpsmithgroup.com" target="_blank">www.tpsmithgroup.com</a>, is a Certified Woman and Disabled Owned Diverse recruiting and staffing firm that is a trusted recruiting partner to top companies. 
<h3>Company Description</h3>
The TPS Group, <a href="http://www.tpsmithgroup.com" target="_blank">www.tpsmithgroup.com</a>, is a Certified Woman and Disabled Owned Diverse recruiting and staffing firm that is a trusted recruiting partner to top companies.

Equipment Maintenance Technician

<h3>Job Description</h3>
Job DescriptionDescription:
Programming Controls Engineer
Job Description
Exempt
Summary (Position Description): The Programming Controls Engineer is responsible for the programming, testing, design and implementation of industrial refrigeration control systems. This role involves PLC and HMI programming, configuring communication platforms, testing control systems, producing documentation, and assisting with project commissioning and training. The engineer will also integrate related equipment, troubleshoot electromechanical systems, and ensure compliance with industry standards. The position requires technical proficiency in control systems, strong problem-solving skills, and the ability to work in various industrial environments, including refrigeration, HVAC, and energy systems. The position requires a strong high-level and abstract engineering vision and does not involve step-by-step supervision or constant prompting. The engineer should be able to understand and define the milestones independently.
Reports To: Programming Controls Engineering Supervisor
Duties:
<ul>
<li>Perform PLC and HMI programming, including logic development, testing, and verification</li>
<li>Configure communication platforms such as TCP/IP, Modbus RTU, Profinet, and Ethernet/IP</li>
<li>Conduct testing and validation of control systems before deployment</li>
<li>Create and maintain documentation, including functional descriptions and engineering summaries</li>
<li>Provide hardware selection, circuit design, and sensor engineering support</li>
<li>Assist in project commissioning, startup, and training</li>
<li>Troubleshoot and resolve control system issues remotely and on-site service work</li>
<li>Develop expertise in integrating related equipment, including screw compressor microprocessor panels and refrigeration systems</li>
<li>Maintain industry knowledge through self-study and training</li>
<li>Generate device lists, I/O lists, and sensor ranges from P&amp;ID diagrams</li>
<li>Support enterprise networking and integration with industrial equipment</li>
<li>Complete weekly reports, project documentation, and timesheets</li>
<li>Travel to project sites for commissioning and support</li>
</ul>
Competencies (Knowledge, Skills &amp; Abilities):
• Strong problem-solving and analytical skills to diagnose and resolve control system issues.
• Proficiency in industrial automation and control system design.
• Ability to work independently and manage multiple projects simultaneously.
• Strong attention to detail and ability to produce accurate documentation.
• Excellent interpersonal and teamwork skills to collaborate with engineers, technicians, and customers.
• Effective time management and organizational skills.
• Strong written and verbal communication skills, particularly in technical documentation and reporting.
• Ability to adapt to new technologies and continuously improve technical knowledge.
• Familiarity with safety protocols and best practices in industrial automation environments.
Requirements:
• Bachelor’s degree in electrical engineering, Mechanical Engineering, Computer Science, or a related field.
• Minimum of 3-5 years of experience in industrial automation, controls engineering, or a related field.
• Experience with PLC and HMI programming using Allen Bradley, GE, Opto 22, FactoryTalk, or Wonderware.
• Hands-on experience with industrial control system design, including sensors, circuit design, and networking.
• Strong understanding of communication protocols such as TCP/IP, Modbus RTU, Profaned, and Ethernet/IP.
• Ability to read and interpret electrical schematics, P&amp;ID diagrams, and technical drawings.
• Experience with variable speed drives and integration with industrial equipment.
• Strong troubleshooting and diagnostic skills for electromechanical systems.
• Willingness to travel for on-site commissioning, start-up support, and training.
• Ability to work in industrial environments with varying conditions, including freezers and rooftops.
• Strong documentation and reporting skills to create functional descriptions, engineering summaries, and project documentation.
• Commitment to continuous learning and staying updated on industry trends and emerging technologies.
Work Environment:
This role primarily takes place in an industrial and office setting. Work may be performed in environments with extreme temperatures, such as freezers and rooftops. Exposure to loud machinery and industrial equipment is expected. Use of personal protective equipment (PPE) may be required in certain work areas. Travel to customer sites for commissioning, troubleshooting, and training may be required.
Physical Demands:
While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand; walk; bend; stoop; use hands; and reach with hands and arms. May be required to lift up to 25 pounds.
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employees are required to follow any job-related instructions and to perform job-related duties requested by management. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required.
This Job Description does not imply an employment contract. VaCom is an at-will employer.
VaCom is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law.
Requirements:

Programming Controls Engineer

<h3>Job Description</h3>
Job DescriptionQuality Executive Director 
A respected, mid-sized hospital in California is seeking an experienced leader to direct its Quality and Patient Safety programs. This position offers the chance to make a lasting impact in an organization that values collaboration, accountability, and patient-centered excellence.
About the Role
The Exec Director of Quality and Patient Safety oversees all hospital-wide efforts to improve outcomes, strengthen safety culture, and maintain regulatory readiness. This leader will partner closely with executives, physicians, and department heads to drive performance improvement and ensure that the hospital consistently meets and exceeds state and national standards.
The role includes oversight of Joint Commission readiness, event review and follow-up, and mentoring a skilled team that turns data into meaningful action. It’s an opportunity to build on a strong foundation and help shape the future of care quality for the organization.
Responsibilities
<ul>
<li>
Develop, implement, and maintain the hospital’s Quality and Patient Safety Plan.
</li>
<li>
Lead the team responsible for data analysis, event tracking, and quality reporting.
</li>
<li>
Partner with medical staff and department leaders to identify trends and drive corrective actions.
</li>
<li>
Ensure ongoing readiness for Joint Commission and regulatory surveys.
</li>
<li>
Provide coaching, education, and mentorship in quality improvement tools and techniques.
</li>
<li>
Build partnerships across nursing, medical, and administrative areas to strengthen accountability and collaboration.
</li>
<li>
Promote a culture where safety, transparency, and learning drive every process.
</li>
</ul>
Qualifications
<ul>
<li>
Current license in a clinical discipline (RN strongly preferred)
</li>
<li>
Certified Professional in Health Care Quality (CPHQ) required
</li>
<li>
Bachelor’s degree in Nursing, Health Care Administration, or related field (Master’s preferred)
</li>
<li>
Minimum five (5) years of experience in hospital-based quality and patient safety leadership
</li>
<li>
Prior supervisory or management experience preferred
</li>
<li>
Strong communication, analytical, and relationship-building skills
</li>
</ul>
Location Highlights
Located in California this area offers a rare blend of affordability and quality of life. Residents enjoy clean air, friendly neighborhoods, excellent public schools, and a cost of living that’s far lower than most major metro regions in the state. It’s an ideal spot for families and professionals who want the California lifestyle — without the traffic, congestion, or sky-high housing costs. You’ll be within driving distance of the Sierra Nevada mountains, Yosemite, and the Central Coast, making it easy to balance a rewarding career with an enjoyable lifestyle.

Executive Director of Quality

<h3>Job Description</h3>
Job Description
Automation and Controls Engineer – Consumer Products – Minimum of 4+ years’ Experience – Manufacturing Engineering or Process Engineering with Automation Experience in Steel Stamping Processes
 ???? Location: CA. | ???? $100k - $130k
Join a Growing Consumer Products Manufacturer!
 Full benefits, 401k match, PTO, relocation assistance &amp; more!
We’re looking for a Automation and Controls Engineer with a deep knowledge of Robots, Rockwell Automation Systems, and Sophisticated In-Line Stamping Equipment.

You could be a well-seasoned Process or Manufacturing Engineer with Automation Controls Experience.
???? Key Responsibilities:
<ul>
<li>Contribute to New Product / Project Programs for Stamped Metal Parts</li>
<li>Collaborate with Customers, Production and Engineering Teams</li>
<li>Knowledge of Robotics is a Must Have!</li>
<li>Conduct Root Cause Analysis and Determine Effective Counter Measures for PLC, Automation and Robotic Concerns</li>
<li>Help Support Prototype Builds and Program Launches</li>
<li>Contribute to New Equipment Installations for Technical Assembly</li>
<li>Knowledge of Automation Stamping Lines is a Must Have!</li>
<li>Contribute to New Program Launches</li>
<li>Assign work to Junior Engineers and Track Progress, as Directed</li>
<li>Manage Overall Project Goals and KPI’s</li>
<li>Maintain Machinery Up-Time and Takt Time</li>
<li>Must have Excellent Reporting Capability and Methodology</li>
</ul>
✅ Requirements:
<ul>
<li>Automation Experience with In-Line Process Machinery, Stamping and Process</li>
<li>Bachelor’s degree with 4+ years in Process / Manufacturing Engineering in an Automotive or High Volume Consumer Products Environment with Robotics, PLC’s, Automation Equipment, Stamping Press Lines.</li>
<li>Strong Communication, Analysis, and Problem-Solving Skills</li>
<li>CAD/SolidWorks, MS Project</li>
<li>Robotics Experience and Ability to Program Robots</li>
<li>Strong PLC Experience, Allen-Bradley, HMI’s, Studio 5000, ControlLogix</li>
<li>Experience and Good Understanding of Various Vision Systems</li>
<li>BS in Mechanical / Electrical Engineering or Industrial Engineering or Equivalent Experience</li>
</ul>
???? Perks:
<ul>
<li>Competitive pay + bonus potential</li>
<li>Full medical, dental, vision coverage, life insurance</li>
<li>401k match, PTO, paid holidays</li>
<li>Minimal travel + lifestyle perks</li>
<li>Excellent growth &amp; promotion potential</li>
</ul>
???? Join a high-growth company where innovation, quality, and leadership are valued!
???? Call Top Dog Engineers: 601.607.8217

Controls Engineer

<h3>Job Description</h3>
Job Description
Design West Technologies Inc. of Tustin, CA has an immediate need for a full-time Senior Quality Engineer. The successful candidate will be responsible for providing quality interface and expertise within the business unit, establish and maintain quality management systems (ISO-9001 and AS9100D), which include the ongoing improvement and sustainment of current business operations, including manufacturing support, inspection and test, supplier monitoring, and customer support that ensures customer satisfaction through quality. This position offers a competitive salary and benefits, including medical, dental, vision, life insurance, paid vacation and holidays, and 401(k). If this sounds like the opportunity for you, apply today!
ABOUT DESIGN WEST TECHNOLOGIES INC.
Founded in 1994, DWT is a nontraditional defense contractor with the expertise and technical capabilities to design new systems or develop and implement enhancements to existing products through comprehensive testing and analysis. Vertically integrated from R&amp;D to final assembly and testing, we offer a unique combination of electrical, chemical, and mechanical product development for weapons and CBRN systems with CNC machining, injection molding, robotic welding, assembly, design, testing, and engineering capabilities.
A DAY IN THE LIFE AS A SENIOR QUALITY ENGINEER
Senior Quality Engineer will provide quality interface and expertise within the business unit, establish and maintain quality management systems (ISO-9001 and AS9100D), which include the on-going improvement and sustainment of current business operations. Provide design and manufacturing support, champion inspection and testing, and lead metrology methodologies. Represent quality as liaison with suppliers and ensure applicable QMS, certifications, practices, and execution align with DWT expectations. 
DUTIES:
<ul>
<li>Assist in the development of departmental processes, document control, and goals with compliance to AS9100D. Focus on continuous improvement in quality performance of Operations and implement process improvements. </li>
<li>Develop and maintain receiving in-process and outgoing inspection &amp; documentation. Ensure manufacturing adherence to procedure.</li>
<li>Review customer non-conformances and coordinate corrective and preventive actions. Complete customers return failure analysis within specified time period and lead corrective action activities</li>
<li>Oversee calibration and testing program.</li>
<li>Manage DCMA quality control inspection process</li>
<li>Assist in managing departmental metrics, goals, and continuous improvement projects.</li>
<li>Develop inspection methodologies using standard metrological practices.</li>
<li>Perform internal, external and non-scheduled audits. Address non-conformities from previous internal and external audits.</li>
<li>Assist engineering with the documenting and develop product inspection work instructions</li>
<li>Assist production and engineering with compliance to state and federal environmental, health and safety regulations.</li>
<li>Review contracts and purchase orders for Quality Assurance provisions and ensure the project's Quality Assurance Plan operates within customer contract/purchase order requirements.</li>
<li>Define, communicate and manage Project Quality Assurance activities through an approved and operating plan for Quality</li>
<li>Develop/perform required product and process testing, as required by quality plans, manufacturing specifications, and customer requirements. Design, build or arrange test equipment &amp; fixtures for quality inspection &amp; test.</li>
<li>Perform supplier quality engineering.</li>
<li>Drive improvements to supplier quality rejection rates.</li>
<li>Lead partnering activities with suppliers to reinforce quality assurance. </li>
<li>Quality liaison between suppliers and DWT. Evaluation of supplier QMS and frequent audits of their quality processes.</li>
<li>Reporting on supplier quality status and evaluating prospective suppliers.</li>
<li>Up to 25% travel.</li>
</ul>
SKILLS/QUALIFICATIONS
<ul>
<li>Experience working in an ISO 9001/AS9100 QMS environment</li>
<li>High proficiency with GD&amp;T, use of metrology instruments, Measurement System Gage R&amp;R, and root cause analysis required</li>
<li>Computer Skills (MS Office Suite) required</li>
<li>Training in foreign object damage awareness. </li>
<li>Understanding of Mil Standards.</li>
<li>Previous work experience with military products and/or DOD is a plus</li>
<li>Experience with MS Office Suite (especially Excel), Database management, Accounting Software (MAS90, SAP or similar), ERP system</li>
<li>BS/BA in Mechanical Engineering, Electrical Engineering, Manufacturing Engineering or Business Administration preferred </li>
<li>Minimum 10 years of Quality Systems implementation and management</li>
<li>Minimum 10 years in an ISO9001/AS9100 or other regulated industry environment</li>
<li>Minimum 5 years' experience supporting ISO9001/AS9100 QMS audit preparation, direct participation, and processing audit results.</li>
<li>Minimum 10 years in a manufacturing environment</li>
</ul>
ARE YOU READY TO JOIN OUR TEAM? 
If you feel that you would be right for this position working on, please fill out our initial quick mobile friendly application so that we can review your information. We look forward to meeting you! 
We are an EQUAL OPPORTUNITY EMPLOYER including disability/Vets
 Job Posted by ApplicantPro

Senior Quality Engineer

<h3>Job Description</h3>
Job DescriptionCompany Description 
Foster Farms has been serving families since 1939. Since the founding days, Foster Farms has always been committed to providing consumers with the highest-quality, best-tasting poultry products available. Our commitment to excellence, honesty, quality, service, and our valued Team Members will shine through in everything we do.
Foster Farms is always looking for talented individuals to join the Foster Farms Team. We offer the experience of a large organization, however, we operate like a family business. More than half of our job openings are filled by internal promotion, and we encourage Team Members to gain a variety of experiences across different functional groups
Job Description 
Pay Rate: $18.20 per hour
Additional $.20 per hour for hours worked between 7:00pm and 11:59pm.
Additional $1.00 per hour for hours worked between 12:00am-4:59am&nbsp;
<ul>
<li>Set up and begin running machines at the beginning of shift, performing changeovers as needed according to the schedule</li>
<li>Ensure that machine forms and seals properly</li>
<li>Adjust machine as required based on product type and sealing issues</li>
<li>Open machine sealed products which were not sealed properly or mislabeled; return defective product back to the line</li>
<li>Re-feed or change forming and sealing film rolls (weighing up to 80LBS) on the machine</li>
</ul>
Qualifications 
<ul>
<li>Possess basic mechanical aptitude required to make machine adjustments</li>
<li>Demonstrated attention to detail in product inspection and return of improperly sealed product and mislabeled product back to the line</li>
<li>Able to work with minimal supervision</li>
<li>Repetitive grasping, wrist, and hand rotation</li>
<li>Required; must be able to life 35-40LBS</li>
<li>Must have good interpersonal skills and work well with others</li>
<li>Maintain management standards</li>
</ul>
 Additional Information 
All your information will be kept confidential according to EEO guidelines.
Foster Farms is an Equal Opportunity Employer – Minorities, Females, Veterans and individuals with disabilities are encouraged to apply.
Foster Farms participates in E-Verify during the hire process at all locations for all new Team Members.

20,258 Manufacturing Jobs